Welcome to the Land Rover Forums - Land Rover Enthusiast Forum.
If this is your first visit, be sure to check out the FAQ by clicking the link above.
You may have to register before you can post: click the register link above to proceed.
To start viewing messages, select the forum that you want to visit from the selection below.
Closing Moab?
Just saw this posted on another OHV forum I look at...
Seems like there is a land use bill, well on it's way through congress, that will shut down 9M acres of BLM land in Utah. Most of Moab is on the map to have access removed.
Need Parts? paulgrant@mac.com, or 203-770-1699 willtillery@roverguy.com, or 434-251-9331
Paul PTSchram 260-804-0458
PM Marty(Drillbit)[url]http://www.landroversonly.com/forums...o=newpm&u=5940
British Parts of Utah, http://www.bputah.com/
Lucky8, http://lucky8llc.com/
things like this are why i have absolutely no faith in the government and their "we know whats best for you" attitude
they are all completely out of touch with society and the working class in america
__________________
97 Disco XD "The Short Bus"
2" RTE lift OME shocks, 265/75 buckshot xmt mudders, cut fenders, custom front recovery points, no carpet, one of a kind skid plate, CB with rack mounted antenna, no power steering
175,000 miles and counting
Out of the 146 co-sponsors only 5 are Republican and 1 is an Independent. I can't believe that they would do this to 9MM acres.
Who is fighting this? Where is the petition for us to sign?
I am a member of the AMA and always give money to the OHV in Iowa but I wouldn't know where to start with this.
Any info would be nice and we should all try to fight this...
__________________
'03 Disco2 SE 4.6L - 112K
OME Lift 751F/763R and 60024F/60025R shocks
275/65/R18E Goodyear DuraTrac's
Safety Devices high-rack, 5 Hella's (LR switches), Farmtec flooring, LR ladder, rear light guards, LR brush guard, limb risers and a Vigg blackout
8mm Magnecore, Denso plugs, and Tom Woods HD shaft
Every seal/gasket replaced and TONS of Misc replacement parts here and there...
Coming Soon:
'04 CDL, bumper/winch, sliders, radius arms, HiLift, on-board air, and a CB.
Forget what I just said - AMA just sent me an email asking me to send a letter.
Below is a link that you can type your zip code into and then your info and it will automatically send a email to your congressman in your district that you can personalize.
At this point it dosen't have any support from the federal congressman from UT so I doubt that it will pass but we should still take action, especially is you ever want to go wheeling or ride motorcycles there someday.
Thanks Mike for bringing this to our attention as this is the only LR or offroad forum I am a member of.
__________________
'03 Disco2 SE 4.6L - 112K
OME Lift 751F/763R and 60024F/60025R shocks
275/65/R18E Goodyear DuraTrac's
Safety Devices high-rack, 5 Hella's (LR switches), Farmtec flooring, LR ladder, rear light guards, LR brush guard, limb risers and a Vigg blackout
8mm Magnecore, Denso plugs, and Tom Woods HD shaft
Every seal/gasket replaced and TONS of Misc replacement parts here and there...
Coming Soon:
'04 CDL, bumper/winch, sliders, radius arms, HiLift, on-board air, and a CB.
They May Be Closing Moab!!!!!!
