Official: GB: Quick Release Fire Extinguisher Mount
#41
Please make sure to measure your mounting location before you order.
If you do not have a set of calipers to properly measure the roll bar, wrap a tape measure around the bar and use the guide here:
Circumference ------ Diameter
---- 4.71" -----------> 1.50"
---- 5.50" -----------> 1.75"
Brian T.
If you do not have a set of calipers to properly measure the roll bar, wrap a tape measure around the bar and use the guide here:
Circumference ------ Diameter
---- 4.71" -----------> 1.50"
---- 5.50" -----------> 1.75"
Brian T.
#42
#44
As promised, the machine shop just let me know the roll bar kits were ready to be picked up. Since I'm still out of town, I've got someone going to pick them up for me as we speak, but they won't be able to deliver them to the anodizers for me until Monday. I'll post up some pics as soon as I have them.
-Brian T.
-Brian T.
#47
#48
#49
Just in case anyone is interested, I have 4 quick release mounts that have very minor blemishes on them. One of the four already has a 1.75" roll bar kit installed which also has a thin spot in the anodizing of the kit. The other three do not have any roll bar kits installed, or holes predrilled in them so they can be configured however you'd like.
Here's the prices:
Blemished Quick Release with Blemished 1.75" mount - $95 + $11.30 shipping
Blemished Quick Release only - $70 + $11.30 shipping
Blemished Quick Release with any size roll bar mount kit added - $100 + $11.30 shipping
Non Blemished Quick Release - $75 + $11.30 shipping
Non Blemished Quick Release with any size Roll bar mount kit added - $110 + $11.30 shipping
Non Blemished Roll Bar Mount Kit - $35 + $5.25 shipping
I will be leaving town early this Thursday, Dec 18th, and will not be back until the 2nd week of January. Let me know ASAP if you would like one of the mounts that need to have a roll bar kit added so that I can get it installed before I leave.
As far as regular inventory is concerned, I only have 5 quick release mounts remaining on hand (aside from the above mentioned blemished items). I do have roughly 15 more that are in stock at a few retailers who are selling them for me, so I may pull the remainder of that inventory since the retail side of things has not been looking very promising. If I do pull them, it won't be until January though.
If you would like to purchase something, please PM me with your PayPal address, and what you would like so that I can send you a PayPal invoice.
Brian T.
Here's the prices:
Blemished Quick Release with Blemished 1.75" mount - $95 + $11.30 shipping
Blemished Quick Release only - $70 + $11.30 shipping
Blemished Quick Release with any size roll bar mount kit added - $100 + $11.30 shipping
Non Blemished Quick Release - $75 + $11.30 shipping
Non Blemished Quick Release with any size Roll bar mount kit added - $110 + $11.30 shipping
Non Blemished Roll Bar Mount Kit - $35 + $5.25 shipping
I will be leaving town early this Thursday, Dec 18th, and will not be back until the 2nd week of January. Let me know ASAP if you would like one of the mounts that need to have a roll bar kit added so that I can get it installed before I leave.
As far as regular inventory is concerned, I only have 5 quick release mounts remaining on hand (aside from the above mentioned blemished items). I do have roughly 15 more that are in stock at a few retailers who are selling them for me, so I may pull the remainder of that inventory since the retail side of things has not been looking very promising. If I do pull them, it won't be until January though.
If you would like to purchase something, please PM me with your PayPal address, and what you would like so that I can send you a PayPal invoice.
Brian T.
Thread
Thread Starter
Forum
Replies
Last Post
Cohbra11
Member Group And Special Buys
34
11-04-2013 03:19 AM
Street Wolf
Modifications
1
07-14-2009 11:49 PM