Welcome to the Land Rover Forums - Land Rover Enthusiast Forum.
If this is your first visit, be sure to check out the FAQ by clicking the link above.
You may have to register before you can post: click the register link above to proceed.
To start viewing messages, select the forum that you want to visit from the selection below.
1) The Adaptor Plate that screws onto the actual transfer case with 2 bolts:
2) That little guy that bolts onto the CDL lock nipple on the transfer case:
3) Any other pieces I need to make this work besides the shifter itself which I have and the CDL Shift cable (Part #: IGK500010 if someone else was interested)
you won't be able to buy those parts. they come as a kit. your best bet is to find one at a pick and pull and get those parts yourself or just buy a whole setup from a trusted parts guy like Paul Grant paulgrant@mac.com
__________________ -Ed
99 DII, TF +2" HD & steering damper, TreadWright 265/75/16, ARB front, BritPart rear, Warn m8000 with synth, Columbia Overland gate panel & dual battery tray, Safari snorkel, RoverBones diff guards, RockWare sliders, DieHard Plat Deep Cycle, Chalkboard Headliner, CB, Wilderness Rack, 6 hella 700 ff's w 100w bulbs, 2 hella work lights
93 RRC TF track rod, tie rod & steering damper, TRW rims
__________________
03 disco:Roof rack, 4 Hellas 4500, 100 watt's HID head light. Center Diff Lock and ARB Lockers front and rear with ARB compresor, Warn 12lbs winch, 35/12.5/R-16 PITBULL's ROCKERS. 5" lift Kit from rovertym, front radius arms, shock adapters from rovertym, mantec snorkel, ranchos 9000, Toms Wood front drive shaft And Toms Wood rear drive shaft... sway bars remove front and rear, Stainles steel brake lines, abs lines extended, rear watt linkage from rovertym, High lift and jerry can !