Operation Magpie.
#201
#202
#203
Thats my next task for today.. I think i have to rig up some hose dealio from under the kitchen sink, down from the 2nd story and out to the parking spot. Haven't actually pulled the plugs yet but i know where they are.
#204
1. Temps don't go down when holding any RPM.
2. Its a brand new WP -- I get pressure when truck is running and i crack the petcock in addition to feeling coolant flowing through hoses. I still have the old WP that i took off so i suppose i can swap it back.. I'd have to make a gasket out of sealant though, I'm assuming i can't reuse the old one
The instructions for the kit i bought doesn't say to empty 1/2 the radiator etc, just that the expansion tank is to be emptied slightly so that no coolant gets sucked up into the test tube thingy. Engine was brought to temp twice and tested and then i did it a third time to verify when the engine was already warm.
2. Its a brand new WP -- I get pressure when truck is running and i crack the petcock in addition to feeling coolant flowing through hoses. I still have the old WP that i took off so i suppose i can swap it back.. I'd have to make a gasket out of sealant though, I'm assuming i can't reuse the old one
#205
#206
Jeezus.
Thanks to the kid who put the HG sealer in before i bought it
Brand new Temp sensor..
Took the WP off to inspect and it was also covered in slime but still.. Functional. Going to be putting the old one back one which is oddly clean -- going to have to use a gasket sealant to reinstall though. Couldn't get to the hose today, but flushed both the engine and radiator with about 8-10 gallons each -- got a few chunks out of the gooey HG sealer but nothing crazy.
I feel like i should get an award for playing with coolant the most on this forum
Thanks to the kid who put the HG sealer in before i bought it
Brand new Temp sensor..
Took the WP off to inspect and it was also covered in slime but still.. Functional. Going to be putting the old one back one which is oddly clean -- going to have to use a gasket sealant to reinstall though. Couldn't get to the hose today, but flushed both the engine and radiator with about 8-10 gallons each -- got a few chunks out of the gooey HG sealer but nothing crazy.
I feel like i should get an award for playing with coolant the most on this forum
#207
#210