Land Rover Forums - Land Rover Enthusiast Forum - 96 discovery Transfer case shifter issue

Page 3 of 3

Show 40 post(s) from this thread on one page

Land Rover Forums - Land Rover Enthusiast Forum (https://landroverforums.com/forum/)

- Discovery I (https://landroverforums.com/forum/discovery-i-39/)

- - 96 discovery Transfer case shifter issue - Video included (https://landroverforums.com/forum/discovery-i-39/96-discovery-transfer-case-shifter-issue-video-included-92076/)

mware18

11-10-2018 07:02 PM

No wires attached to the area I circled. I attached a cable to that and it was just a bolt.

I circled that that because I was wondering what that cable was for.

im guessing I need to order one of these and that is not what I removed to reattach the cable.

https://cimg2.ibsrv.net/gimg/landrov...930b5a8277.png

aemnky606

11-10-2018 07:42 PM

Quote:

Originally Posted by mware18 (Post 669424)

Here is the cable that was not attached.
https://cimg3.ibsrv.net/gimg/landrov...592255a65.jpeg

that is your tc vent line. I would blow it out with some air to make sure it is not clogged. Much easier now that you have the area open.

Here is the location of the TC switch :

https://cimg1.ibsrv.net/gimg/landrov...35ad26de22.jpg

mware18

11-10-2018 08:00 PM

Thank you for clearing that up. I’m going to order a switch now and go ahead and replace since it’s all open.

Fingers crossed all is good from there. Luckily it wasn’t as bad as I thought it would be.

All times are GMT -5. The time now is 06:12 PM.

Page 3 of 3

Show 40 post(s) from this thread on one page