Hose from Charcoal canister, where does it go?
2 Attachment(s)
I cannot find the schematics in my shop manual of where this one goes? The sticker under the hood doesnt really help......
It is the hose on the far right, here are the pics: |
IF I am not mistaken, it just vents to atmosphere. I asked the same thing years ago when I first got my Discovery. Mine does not even have a hose on that nipple.
One line comes in from the gas tank (for vapors?), the second goes to the little valve(?) looking plastic component, and the third one is the output after the charcoal flitering process I THINK? Not really up on the charcoal cannister. If I am wrong, I am sure others will let us know. |
Thanks Dan.
I just find it odd that it had a hose clamp on the end....to where....dunno?!?!? |
bump......where does it vent to???
Found another hose missing a home, will post it later tonight.... |
bump......
If anyone has a 96 with the round canister, please take a few pics of the routing...PLEASE!?!??!!? |
Mine, like Danny's, doesn't have a hose connected to the larger nipple and I have no f'n idea where it goes. Did you download the entire RAVE, the 588MB vs of it? If it's not there then it may be time to call the dealer if needed. Are you throwing any codes? I'm not and it did pass smog last year so I'm leaving well enough alone.
|
I actually have the book and downloaded all the RAVE, but still could not find anything.
Since it did pass smog, maybe I should just forget it..... I was hoping it would be conncted somewhere in the intake, since it sucks in air..... |
I'll try to remember to take a look at my '96 SE7 when I get home from work tonight.
|
Originally Posted by Chris-bob
(Post 254750)
I'll try to remember to take a look at my '96 SE7 when I get home from work tonight.
|
I looked at my 96 today I dont have anything atached at the bigger port. Ill take a pic tomorow and post it.
|
Originally Posted by Long Haul
(Post 254820)
I looked at my 96 today I dont have anything atached at the bigger port. Ill take a pic tomorow and post it.
|
Cant wait to see the pic....then I can mark this one off the list!!!!
|
I was just looking at that yesterday... I have about 3 inches of hose, and then nada. It just seems to vent into the atmosphere.
I didn't want to look too close because I was certain there was going to be something to fix if I started poking around LOL |
Sorry it took so long...
3 Attachment(s)
Here are the pics.
|
Thanks Chris!
That hose I have is coming off. t |
The third pic is the view of the one hose that runs down the frame, most likely to the tank.
|
Originally Posted by Chris-bob
(Post 255092)
The third pic is the view of the one hose that runs down the frame, most likely to the tank.
|
Sorry the Mrs's been keeping me busy havent got a chance to take a pic yet but ill get one ASAP.
|
1 Attachment(s)
Mine doesnt have anything atached to thet nipple either. Attachment 45064
|
Thanks!!!!
|
All times are GMT -5. The time now is 06:18 AM. |
© 2024 MH Sub I, LLC dba Internet Brands