OK two D1's
 

Both my D'1s are for sale as a SET. $3,900.00 for the pair. Yes I Bought 2001 RR.
Any Interest email me at seecarr@bellsouth.net we can talk conditon and price.

Did you say some time ago "I think I'm ill"? LOL

congrats

If I had the discretionary income, I'd be on the '95 like stink.

luck,greg

Now I KNOW I AM!!! the 2001 was just to good to pass up got it for my price, BUT my wife talked to the lady and get the price DOWN, she is good at that.
The 1995 is running great 98% of the time but I have done nothing to it other than clean the fuel system and put in a battery. Mutley has no rust at all and just needs to be mated with the 1996 for a real nice D1.
The 1996 NEEDS a transfer case but I have 4 found for $350 to $450 each so no big deal. Working on getting a clean title since the unit is a mechanics lean car that was in storage for 2 1/2 years at $15.00 per day. I bought the 96 and will try and get with the owner that has the title if not I can get one from the state just takes time.
Basically you can use the 95 as a hunting truck and put the transfer case in the 96 and drive it. Engine and everything else is great with the Heat and A/C working great in both units.
Well now I MUST sell some INDOOR cars so I can park the RR inside in S.C.
I put the 1988 Jaguar and the 1978 Rolls on Craigslist so lets see what shakes out.

Don't be such a cheapskate!

Build a 50x50 polebarn with heat & A/C to house your new stable

luck,greg

Well a person came over the shop and paid me for the 96 but did not want the 95, Strange since the 95, "Mutley" runs and the 96 had NO title and does not run. I gave him the PO name who has the title wished him luck and took the money.
So I now have Mutley who I have $1,800.00 in make me an offer and drive the old dog home.

George, you may want to download this, I think it's the same as what I used.

I was able to clear EAS faults, as well as custom reset my EAS parameters.
It was excellent.

Mine used 16 o-rings to seal the air compressed joints - easy fix $3 at hardware for 1/4" o-rings.

http://www.rangerovers.net/repairdet...rsoftware.html

luck,greg