03 disco o2 sensor
#31
03-09-2019, 07:18 PM
I would call that a WIN!!! 
If you want to keep that connector/wires from being cooked again get a small bit of Heat Sleeve or Cool Tube.
You will not need much, but get a rough outside measurement of the connector so you can get the right size.
Something like this (the non Velco is cheaper just SEARCH) > https://www.summitracing.com/parts/sum-350138-1/overview/
Advance, AutoZone, Napa, etc also sell this heat barrier.
If you want to keep that connector/wires from being cooked again get a small bit of Heat Sleeve or Cool Tube.
You will not need much, but get a rough outside measurement of the connector so you can get the right size.
Something like this (the non Velco is cheaper just SEARCH) > https://www.summitracing.com/parts/sum-350138-1/overview/
Advance, AutoZone, Napa, etc also sell this heat barrier.
i used the heat shield from my old o2 sensor for the wires behind the intake plus I extended those wires to keep them far away from the exhaust
#32
03-10-2019, 05:03 PM
Camel Trophy
Thread
Thread Starter
Forum
Replies
Last Post