2000 discovery 2 ignition wiring?
 

so my maf and camshaft position sensor are throwing codes along with about 9 other things. the car is running very rich but other than that it runs ok. i replaced the maf sensor no change. started poking around and found the fuse f2 blown it has a pick of engine with lightening bolt going through it. replaced and the maf starts to work i can see it on my meter and then the care dies. restart runs for 30 seconds and dies. pull fuse out and it runs like it did before really rich and maf puts out nothing.??? it has 123000 on it and we love the rig but it is kicking my butt. please any help would be great.

how does it die after running 30 seconds..does it stumble or just out like a light?

it acts like its tuneing itself in cause the idle changes a little and then stumbles out.

air filter good? whens the last time the intake has been cleaned?

i pulled the filter and cleaned it all up 2 weeks ago. i donot know what f2 goes to do you?

no idea..download the RAVE manual..not just the shop manual but the whole RAVE..it has wiring diagrams