my new to me white 1999 D2
#41
Got this in after work. Pulled all the old threads out and drove this in with the ryobi 18v 1/2 impact carefully and kept cleaning the hole and the self tapping drain plug. Finally got it in and then added the crush washer and torqued it down to 18 ft pounds. The little screw is torqued to like 7 ft pounds. I'll probably add some blue lock tight to everything tomorrow. Iv got a quart of oil sitting in the pan now. Will check if the plugs leaked any oil in the morning.
#42
Ok, well at walmart and can't unlock the car. I was able to stick something into the door and pop the lock, but with the key in the ignition it won't start and the alarm just goes off for a bit. Can I pull the battery cables to reset the system? Can I drill out the driver side door to turn the lock?
#43
Can you roll the window down? Do you have a remote? Normally if you operate the door lock from the outside to lock unlock it will reset the alarm. It saw the door open without a remote or key so it triggered the alarm/immobilizer. Either a lock/unlock via remote or door lock will reset it.
Thread
Thread Starter
Forum
Replies
Last Post
essco22
Retired - Private For Sale/Trade Classifieds
2
02-21-2011 12:30 PM
psk8888
Retired - Private For Sale/Trade Classifieds
0
08-28-2010 03:02 PM
95raingerowver
Retired - Private For Sale/Trade Classifieds
0
02-19-2008 03:13 AM
wileyabbas
Retired - Private For Sale/Trade Classifieds
0
07-27-2007 03:48 PM