Post- Head Gasket
#62
RE: Post- Head Gasket
Pulled out the thermostat, ran the motor, ran a bit warmer, hot rodded it, took temps ... never overheated, lost a bit more coolant than normal and white smoke was a bit thicker at higher rpms ....
didn't fix my cracked cylinder sleeve
(with thermostat out, i hooked up a trailer and went and picked up my new motor)
haha
didn't fix my cracked cylinder sleeve
(with thermostat out, i hooked up a trailer and went and picked up my new motor)
haha
#63
#64
RE: Post- Head Gasket
Yah im definitly taking it apart, gonna build up the motor (horsepower time, woot)
if it is the sleeve, get new ones pounded in, get heads re-checked for cracks ... intake checked, use same headgasket and stretch bolts, and bore the motor out .... bigger pistons, possibly stroke it ....
if it is the sleeve, get new ones pounded in, get heads re-checked for cracks ... intake checked, use same headgasket and stretch bolts, and bore the motor out .... bigger pistons, possibly stroke it ....
Thread
Thread Starter
Forum
Replies
Last Post
jrkstore43
Discovery II
24
07-08-2020 07:27 AM
carlitonsky
LR3
0
11-10-2009 07:14 AM