Transmission
#11
#13
#14
This is what I would do, take the pan off, if its dented or warped, heat her up and work out the dents carefully w/ metal working hammer and dolly,if u dont heat up the aluminum it will crack. to fix the crack, you can groove it out to make it a little larger, really cleane it an rough up the surface around and in the crack, inside and outside of the pan and fill in the crack and both sides of the crack with metal epoxy let dry, or look up www.eastwoodco.com, look up aluminum brazing rods, they sell a kit, that is easy to use all you will need to buy is a tourch, one used for plumbing. there if you do one of these sugestions u will save a coup[le hundred dollars
#15
#18
#19