Wanted to thank Discomike
#1
Wanted to thank Discomike
I posted yesterday that i had some problems after replacing the plugs and wires on my 2000 discoII. discomike gave me a call(on a sunday morning) and gave some information that i needed to figure it out. Truck is running great.
WOW what a pain in the *** though. The bent screwdriver and some patience are a must. In the end however when armed with good info it's really not that hard. It does make one wonder why in the world the coil is at it's present location. I mean the rest of the truck that I've had to deal with has been a cinch to work on, but this????
One thing that I would suggest after this endevor is to carefully lay on top of the motor(I laid down a tarp with a thin piece of foam over that) and slowly trace the wires. Or if your a yoga master it shouldn't be a problem.
Thanks agin Mike
WOW what a pain in the *** though. The bent screwdriver and some patience are a must. In the end however when armed with good info it's really not that hard. It does make one wonder why in the world the coil is at it's present location. I mean the rest of the truck that I've had to deal with has been a cinch to work on, but this????
One thing that I would suggest after this endevor is to carefully lay on top of the motor(I laid down a tarp with a thin piece of foam over that) and slowly trace the wires. Or if your a yoga master it shouldn't be a problem.
Thanks agin Mike
Thread
Thread Starter
Forum
Replies
Last Post