Replacing tensioner pulleys?
#11
#12
#14
#15
#16
Actually 5mm is significant. Again there are two tensioners, they are not the same or interchangeable. Also both belts are not the same width. I *think* that tensioner would be for the main drive belt, the forward belt. You would have to cross reference the part numbers.
Yes - I know. Sorry I used a double negative . It IS significant (conversely it isn't insignificant).
The smaller width one could be for the accessory (ie. the one closest to the engine) as that belt is narrower.
The idler pulley I have is also narrow too I believe. the Main belt - is thicker (the one that loops the fan clutch and crank).
#17
#18
#19
#20