Gear selector stick to rotary knob
#1
Gear selector stick to rotary ****
Can anyone help. PLEASE. I want to change the discovery 4 2010 centre console with the stick gear selector style to the rotary **** one. Does anyone know if they can just be swapped. I looked at some pictures of the plugs and they seem similar.
does this require coding or is it new modules required.
thanks
does this require coding or is it new modules required.
thanks
#2
#5
Probably can for $10k
In reality, No.. It's not as simple as a new ECU, they use a mechatronic unit inside of the transmission. It's getting the rest of the truck to realize it has an 8 speed.
The 8 speed was never used with the 5.0 in the L320, L322, or L319..So Land Rover themselves never did it until the updated generations and the SCV6.
In reality, No.. It's not as simple as a new ECU, they use a mechatronic unit inside of the transmission. It's getting the rest of the truck to realize it has an 8 speed.
The 8 speed was never used with the 5.0 in the L320, L322, or L319..So Land Rover themselves never did it until the updated generations and the SCV6.
Thread
Thread Starter
Forum
Replies
Last Post
Lee1140
General Range Rover Discussion - Archived
0
12-01-2009 10:17 AM