Land Rover Forums - Land Rover Enthusiast Forum - View Profile: Alex_M

Alex_M Alex_M is offline

Senior Member

Visitor Messages

Showing Visitor Messages 1 to 10 of 10
  1. Aj6543
    05-01-2018 06:38 PM - permalink
    Alex-I have a few questions about your maintance list.

    1. Which synethic gear oil do you suggest?
    2. Where can I buy the brass differential fill plugs from?
    3. What is the name of the "green coolant"?
    4. Same goes for MAF cleaner.

    Thank you!!
  2. cardude59
    03-22-2018 09:54 AM - permalink
    hi Alex. my name is Wayne, I would like to know if you own a scan tool that you would recommend to scan and test all the systems on a 1998 p38 range rover 4.6 hse. i'm have trouble finding one that will do rovers that old as well as other u.s. vehicles. any help or suggestions would be appreciated. thanks.
  3. Lisa Bunch
    01-16-2018 03:30 PM - permalink
    Hi Alex,
    I received my gauges today, both are mechanical oil press & water temp. The water temp has a 3/8" fitting. Looks like I am going to have to drill and tap the rad hose tee. Speaking of rad hose tee, you used a 32mm/1-1/4, I figured tje upper hose was 38mm/1-1/2". Did that tee fit ok or would you recommend the 38mm?
  4. CollieRover
    01-15-2017 10:58 AM - permalink
    Thanks Alex! I am unimpressed with the 150amp alternator I have. I am going to go back to the 130 amp.

    Thanks for the advice as always!
  5. CollieRover
    01-14-2017 10:54 AM - permalink
    Hey Alex,

    I have a question about running your electric fan. I put in a 150amp alternator from ebay, but it is noisey on start up. I am considering going back to the stock 130 amp alternator. Is that what you are running? I have a GTO Fan in their that has two fans one 13" and one 15". They pull less than 8volts each so I am wondering if you are finding the 130 amp alternator adequate for your taurus fan that is powerful.

  6. garrddogg
    06-28-2016 07:15 PM - permalink
  7. garrddogg
    06-28-2016 07:15 PM - permalink
    I have a couple questions before i dedicate my energy to replacing my 03 cdl from an 04. any chance you could give me a call or i could call you?
  8. COSitsWORTHit
    01-09-2016 08:50 PM - permalink
    Alex, your mod list says you did HID mod with projectors. Got any pics of that?

    I've got some projectors, just need to get brave enough to open up my headlights.
  9. coors
    12-11-2015 02:10 PM - permalink
    Hey Alex. I'm in my garage getting ready to modify the cooling hoses for the inline 180 stat, but am confused on how to route the lower rad hose.

    I picked up a lower rad hose for an 02 330 as described in the how-to write ups, but don't see how this thing will fit between the radiator output and water pump fitting. The angles don't look right. And ideas?
  10. kdscott100
    09-30-2014 03:36 PM - permalink
    Hi, I am interested in your brush/bull bar. Can you post or send me a picture? Cheers, Kevin [email protected].

About Me

  • About Alex_M
    Southwestern Virginia
    I build and fix things, and occasionally work a cash register.
  • Signature
    '03 Disco "Frankenstein's Monster": Kent H180 Cam, Port'n'Polish, Hedman Headers, Custom Exhaust, Custom Snorkel, K/N Pod Filter, Inline Thermostat, Dual Transmission Coolers, HID Projectors, Rear Panhard Conversion, Rotoflex Delete, 3.5" lift

    Go here for all my mod write ups!

    Major 60k Mile Service - Revised

    Visit Tumblr: Land Rover Chronicles to see a running blog of all my repairs and mods. - Hasn't been updated in a while. for parts!


Total Posts
Visitor Messages
Total Thanks
General Information
  • Last Activity: Today 04:50 PM
  • Join Date: 08-23-2014
  • Referrals: 0


Showing Friends 1 to 9 of 9

Social Profiles

Instant Messaging
Send an Instant Message to Alex_M Using...
This Page
Featured Sponsors
Vendor Directory

Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to and affiliated sites.