Homemade Limb Risers
Last time I went off roading, I went through some tight places where branches were going across my windshield and it tore off the Black plastic piece on the passenger side a pillar. So I went out and bough a few things to make some limb risers.
(8) 1/8" cable clamps (2) small 1/4" shackles. (2) 8.5' 1/8" steel cable with vinyl coating (2) Turnbuckles with a hook on one side (4) 1/8" Thimbles And a can of plasti dip spray so it wasn't bright silver and had a rubber coating. |
Some pictures, and it cost about 40 dollars for all the materials and took very little time.
Attachment 873 Attachment 874 Attachment 875 Attachment 876 Attachment 877 |
Linky no worky
|
That blows, How do I put the picture right in the post?
|
Originally Posted by roverlax2
(Post 124396)
That blows, How do I put the picture right in the post?
First down load the pic into a web album service like picasaweb.com or photobucket.com Then open the pic using the web album and right click copy the "image location" paste that into the pop up window that comes up when you click on the little icon with the mountain in it... TADA! try it first by google searching any image you want, right click copy "image location and try it" I just did http://z.about.com/d/4wheeldrive/1/0...dRover_1RR.jpg |
Love that picture.. I would LOVE to own an old Series Rover
|
12 Attachment(s)
Thanks, lets try this again.
Attachment 48444 Attachment 48445 Attachment 48446 Attachment 48447 Attachment 48448 Attachment 48449 Attachment 48450 Attachment 48451 And I added lights yesterday Attachment 48452 Attachment 48453 Attachment 48454 Attachment 48455 |
sweet
|
Here are mine http://picasaweb.google.com/jycsalas/LimbRisers#
|
1 Attachment(s)
Looks great, but ouch dude, drilling holes through your bumper.
Should have gotten 'P-Clamps' and run it that way in my opinion. Attachment 48402 |
All times are GMT -5. The time now is 05:32 PM. |
© 2024 MH Sub I, LLC dba Internet Brands