WTB: All the things to convert FROM coils TO SLS
If there's anyone out there converting from SLS to springs, I'd love to buy all your SLS material, assuming it works. I'm looking to swap my coils to SLS, but it's on a truck that never had SLS to begin with. Basically looking for the dash switch, air bags, ride heigh sensors, compressor, tubing and the filter from behind the driver's side taillight.
|
I have some items, compressor tubing, dash switch, etc. I don’t know if the compressor works but it looks clean.
|
Originally Posted by zski128
(Post 757340)
I have some items, compressor tubing, dash switch, etc. I don’t know if the compressor works but it looks clean.
|
Let me pull it all and make sure I can remove it without breaking anything. Have you found directions to install this? There should be a pigtail of wires under the drivers side passenger door where the shelf is attached to the frame rail to plug in the compressor. I think it’s 3 connectors.
|
I have a set of Arnott bags with only a couple thousand miles on them if you end up needing a set. I had reinstalled the sls on my disco and then removed it again because I preferred the springs.
|
All times are GMT -5. The time now is 02:23 AM. |
© 2024 MH Sub I, LLC dba Internet Brands