Land Rover Forums - Land Rover Enthusiast Forum

Land Rover Forums - Land Rover Enthusiast Forum (https://landroverforums.com/forum/)
-   Retired - Private 'Wanted' Classifieds (https://landroverforums.com/forum/retired-private-wanted-classifieds-22/)
-   -   tan upper dash (https://landroverforums.com/forum/retired-private-wanted-classifieds-22/tan-upper-dash-67508/)

discodiesel 06-09-2014 12:47 PM

tan upper dash
 
I'm looking for the dash piece above the steering wheel on a disco 2. My interior is tan. Thanks!

Paul Grant 06-09-2014 04:49 PM


Originally Posted by discodiesel (Post 467609)
I'm looking for the dash piece above the steering wheel on a disco 2. My interior is tan. Thanks!

I have one with two upper mounts that are perfect. The two lower mounting point have been enlarged over the years as most have. What I suggest for people to do to ameliorate this common problem is to use slightly longer black screws than what originally came with the truck and small black washers. The bezel mounts securely and you'd need a flashlight to see the modification.

If you're interested let me know. Also, let me know where it would be going and I can get you a total cost.

discodiesel 06-10-2014 08:15 AM

Thanks Paul. The two clip mounts are where mine has started cracking. I can use larger screws on the lower points. I live in Grand Junction, Colorado zip 81507.
Bill

Paul Grant 06-10-2014 08:20 AM

3 Attachment(s)
I just sent you a PM.

Here are a couple of hastily snapped photos.
Cheers,
Paul

Paul Grant 06-10-2014 08:47 AM

I just got your PayPal. Thank you. You will receive tracking shortly. The part will go out today.
Cheers,
Paul

Erp124 01-15-2019 11:32 PM

04 Disco Dash Lifting
 
I need to replace windshield and figure its the perfect time to finally fix the dash which has curled / lifted. Whats the best way to fix this? Any tips? Paul Grant - whats does a refurbed / new black dash cost? Hows the install?

Paul Grant 01-18-2019 09:35 AM


Originally Posted by Erp124 (Post 676690)
I need to replace windshield and figure its the perfect time to finally fix the dash which has curled / lifted. Whats the best way to fix this? Any tips? Paul Grant - whats does a refurbed / new black dash cost? Hows the install?

Installation is very involved but not that difficult. If you haven't done one before, go slow and take lots of photos as you disassembly. A black dash is a large and expensive item to ship. The cost would depend largely on where you're located. If you're in CT, come on up and pick one up for a couple of hundred dollars. If you're on the west coast start looking in scrap yards in your area.
Cheers,
Paul


All times are GMT -5. The time now is 11:02 PM.


© 2024 MH Sub I, LLC dba Internet Brands