engine issues when cold after sitting a while...
#1
engine issues when cold after sitting a while...
Been trying to nail this one down for a bit but time to ask for help
On occasion after sitting a few days or even more rare over night, i've had issues with accelleration (misses perhaps?)...
Some accelleration in low rpm, but if I get over 2k rpm it will backfire even after the engine has come up to temp. This usually resolves itself fairly quickly then everything is back to normal (for a rover anyway)...
No codes are ever thrown, but it is frustrating.
I replaced the plugs & wires (8mm magnacore) when I started working on the truck a bit over a year ago.
I see it about once a week on average, current temps are 20-40's I don't recall it happening during the summer/fall
well can I be any more vague? ... just looking for suggestions on things to look for
On occasion after sitting a few days or even more rare over night, i've had issues with accelleration (misses perhaps?)...
Some accelleration in low rpm, but if I get over 2k rpm it will backfire even after the engine has come up to temp. This usually resolves itself fairly quickly then everything is back to normal (for a rover anyway)...
No codes are ever thrown, but it is frustrating.
I replaced the plugs & wires (8mm magnacore) when I started working on the truck a bit over a year ago.
I see it about once a week on average, current temps are 20-40's I don't recall it happening during the summer/fall
well can I be any more vague? ... just looking for suggestions on things to look for
#4
#6
K, yeah another day that everything seems fine... Thinkin its usually afterthe weekend when it sits an extra day, will log till I see something.
Thread
Thread Starter
Forum
Replies
Last Post
CrimsonRavyn
Discovery II
18
02-26-2012 09:40 PM