Welcome to the Land Rover Forums - Land Rover Enthusiast Forum.
If this is your first visit, be sure to check out the FAQ by clicking the link above.
You may have to register before you can post: click the register link above to proceed.
To start viewing messages, select the forum that you want to visit from the selection below.
I'm thinking of chopping off my resonator to achieve a little more air flow and a touch of growl. However a quick search shows a split opinion about wheither it's a nice throaty rumble or an annoying drone. Love to know what folks think who've tried it.
__________________
1999 Disco 2, SE7
-Newly installed 4.6 Bosch with 6000 miles
Coming soon:
-ARB Front bumper
-2" lift
Need Parts? paulgrant@mac.com, or 203-770-1699 willtillery@roverguy.com, or 434-251-9331
Paul PTSchram 260-804-0458
PM Marty(Drillbit)[url]http://www.landroversonly.com/forums...o=newpm&u=5940
British Parts of Utah, http://www.bputah.com/
Lucky8, http://lucky8llc.com/
You want sound, get the Borla exhaust system. Best $800 I spent on my Rover. Sounds excellent is solid T-304 stainless steel (not coated) and has aMillion Mile warranty. Goto www.borla.com for more info.
I have a cracked LH exhaust manifold that has been patched. The truck is cold. I am getting new manifolds and cats this weekend.
I just cut the resonator off and turned it down under the truck. I am going to have a good tip installed when I get my cats done.
Enjoy
__________________ RAVE Good Oil
2003 Range Rover HSE with 2008 trim
2010 GLK 350 Mercedes
1990 VW Cabriolet - Lake car...
1997 Discovery SD-7 to put the boat in.
Cutting off the resonator was worth every penny, UPS, I didn't have to spend a thing, certainly works for me, maybe there was no horse power gain, but for the most part, there isn't with a Borla except out on te road at highway speeds and even then I think it is hard to justify.
Mike
__________________
Mike
Retired service manager. Member of the Solihull Society, NCLR club, SCLR and Santa Barbara 4 Wheelers.
99 D2, 3" lift, CDL with a Detroit and T.T. lockers, H.D. axles, 4:11 gears, Custom front and rear bumpers, sliders, Warn winch, and 5 HID's.
Need Parts? paulgrant@mac.com, or 203-770-1699 willtillery@roverguy.com, or 434-251-9331
Paul PTSchram 260-804-0458
PM Marty(Drillbit)[url]http://www.landroversonly.com/forums...o=newpm&u=5940
British Parts of Utah, http://www.bputah.com/
Lucky8, http://lucky8llc.com/
well, he has a 4.6 not a 4.0, sounds like glasspacks, and I'll bet he hollowed his cats. Alabama plates. YOu guys don't have emissions tests, right?
__________________ RAVE Good Oil
2003 Range Rover HSE with 2008 trim
2010 GLK 350 Mercedes
1990 VW Cabriolet - Lake car...
1997 Discovery SD-7 to put the boat in.
No Resonator? Let's hear it! Post a clip
