04 LR Disco 2 SOunds System Install
 

Hi All,

I've been installing a sounds system in my disco and just finished wiring everything and connecting the speakers tweeters and subwoofer to my amplifiers however I cant get my midrange speakers ( the ones on the bottom of the doors) to sound right. My father is EQ-ing them through the amp but the sound isn't really changing to his liking and suggests there is a capacitor affecting it (He's been in audio visual all his life and makes his own speakers so I trust in it not being User Error). I was wondering if anyone new where the capacitor locations might be or if y'all might have any input. My setup is detailed below:

(All of the amplifiers were wired using the factory cables that used to go to the factory amp)

Sound Magus C8-Pro: Using this one for the pillar tweeters and top door speakers (supposing they are Hi/Mid range) --Recieves input from aftermarket radio

Sound Magus CS1200.4 :Using this one for the bottom door speakers front and back doors ( these are Mid-low range)-- Recives input from SOund Magus C8

JL Audio JX: Using this one for the sub (low range)-- Receives input from Sound Magus C8

See Pictures below of the whole process I underwent

https://cimg7.ibsrv.net/gimg/landrov...61041d2b3c.jpg
https://cimg8.ibsrv.net/gimg/landrov...910bd7fb78.jpg
https://cimg9.ibsrv.net/gimg/landrov...2cb7a4af6d.jpg
https://cimg2.ibsrv.net/gimg/landrov...3b69e6d300.jpg
https://cimg4.ibsrv.net/gimg/landrov...65262644f7.jpg
https://cimg5.ibsrv.net/gimg/landrov...15e60aa2a8.jpg
https://cimg6.ibsrv.net/gimg/landrov...403e6f754d.jpg
https://cimg7.ibsrv.net/gimg/landrov...a43044fea6.jpg
https://cimg8.ibsrv.net/gimg/landrov...cd76f64b59.jpg
https://cimg9.ibsrv.net/gimg/landrov...c3882904e0.jpg
https://cimg0.ibsrv.net/gimg/landrov...6eca128905.jpg
https://cimg1.ibsrv.net/gimg/landrov...a7bc35d0e7.jpg

Nice Build! I've done similar to my 04.

Built a whole set up, changed it, rebuilt it. Lol