Have spare will let go cheap..
#1
![Default](https://landroverforums.com/forum/images/icons/icon1.gif)
I have a spare 98 D1 - Oxford Blue with the following benefits.
Front and rear a/c blowing cold
engine idles perfect and does not overheat - just will not run smooth above 1000-1200 rpm.
Transmission was working fine when I was able to drive normally last time.
body in fair to good condition. rust starting at rear door pillars, just not in full rot mode yet.
All windows are perfect and the seals have minimal cracks in most - front is great shape.
transfer case is free and locks in and out in both ranges.
The following has been removed.
dash top (pod) - but a cracked spare is in vehicle
burrell wood - replacement in vehicle from my other D1
Sunroof ECU and one motor removed
I wish to remove the MFU to replace mine but have not yet.
I wish to exchange torsion bars in the rear due to mine being bent but have not yet.
I would rather keep the Defender style wheels for winter spares if a person wanted this to dismantle for the parts. I would consider this in my asking price. It also would complicate the transportation.
Anyone have a trailer for transport? and the need for anything off this?
Any questions - let me know. I may be slow to respond as I am going back to work for a while (the reason for the failed project)
BTW I am in Springfield Missouri on I44
Offers?
Thanks
Front and rear a/c blowing cold
engine idles perfect and does not overheat - just will not run smooth above 1000-1200 rpm.
Transmission was working fine when I was able to drive normally last time.
body in fair to good condition. rust starting at rear door pillars, just not in full rot mode yet.
All windows are perfect and the seals have minimal cracks in most - front is great shape.
transfer case is free and locks in and out in both ranges.
The following has been removed.
dash top (pod) - but a cracked spare is in vehicle
burrell wood - replacement in vehicle from my other D1
Sunroof ECU and one motor removed
I wish to remove the MFU to replace mine but have not yet.
I wish to exchange torsion bars in the rear due to mine being bent but have not yet.
I would rather keep the Defender style wheels for winter spares if a person wanted this to dismantle for the parts. I would consider this in my asking price. It also would complicate the transportation.
Anyone have a trailer for transport? and the need for anything off this?
Any questions - let me know. I may be slow to respond as I am going back to work for a while (the reason for the failed project)
BTW I am in Springfield Missouri on I44
Offers?
Thanks
Last edited by rickroverover; 09-03-2014 at 10:26 PM. Reason: forgot my location
Thread
Thread Starter
Forum
Replies
Last Post
nelsontod
Discovery I
11
05-18-2012 12:20 PM
rockyblue123
Discovery II
4
05-18-2012 10:10 AM
honda50r
Retired - Private For Sale/Trade Classifieds
2
03-02-2012 06:38 AM
Chris528
Retired - Private For Sale/Trade Classifieds
1
05-07-2010 08:37 PM