Round discovery headlights
Well I was going to keep this hidden from you guys [my dirty little secret] untill I found a pair. I even had someone in the uk who was going to ship them to me. But Im almost 100% certain on backing out since i cant find any REAL pictures.
http://cgi.ebay.co.uk/RDX-Headlamp-S...ht_2109wt_1141 http://cgi.ebay.co.uk/RDX-Headlamp-S...ht_2074wt_1141 |
i dont like these taillights but one of you might
http://cgi.ebay.co.uk/RDX-Rear-lamp-...ht_2459wt_1141 |
Interesting. I'd like the front headlamp conversion...IF it was a bit more specific and someone could verify that these would work. That, and if the price was lower than the cost of stock headlamp assemblies...
|
I think the price is fine.. GREAT actually.. Realize this replaces the...
HEADLIGHT 300$ UGLY TRIM 80$ UGLY CHEAP PLASTIC POS BLINKERS. 80$ VERY good in my oppinion.. Looks great in the pictures. just cant find any other info on them. |
Originally Posted by Spencerfitch
(Post 223878)
I think the price is fine.. GREAT actually.. Realize this replaces the...
HEADLIGHT 300$ UGLY TRIM 80$ UGLY CHEAP PLASTIC POS BLINKERS. 80$ VERY good in my oppinion.. Looks great in the pictures. just cant find any other info on them. Maybe one of our limey brothers that live near there could swing by their store and check it out for us.... |
i really wish.. and i thought it came out to 270$ my b
|
I kind of like those tail lamps.
|
Originally Posted by Spencerfitch
(Post 223865)
Well I was going to keep this hidden from you guys [my dirty little secret] untill I found a pair. I even had someone in the uk who was going to ship them to me. But Im almost 100% certain on backing out since i cant find any REAL pictures.
http://cgi.ebay.co.uk/RDX-Headlamp-S...ht_2109wt_1141 http://cgi.ebay.co.uk/RDX-Headlamp-S...ht_2074wt_1141 These are 15 miles down the road from me.... What pictures were you looking for? You guys ever need anything sending over all you gotta do is ask!! Darren |
Originally Posted by D1scoDaz
(Post 223901)
These are 15 miles down the road from me....
What pictures were you looking for? You guys ever need anything sending over all you gotta do is ask!! Darren |
Originally Posted by D1scoDaz
(Post 223901)
These are 15 miles down the road from me....
What pictures were you looking for? You guys ever need anything sending over all you gotta do is ask!! Darren I wantvso bad to have these I just gotta know what they look like |
I'll see if i can get some proper pictures of them for you.
I can get you whatever you want, but its the shipping that kicks the ar$e out of it (thats a$$ to you guys). My mate has a spare 300tdi, no gearbox though. I think an engine alone you can pick up for about £750, gearbox about £200 (manual or auto) I wouldnt like to make a stab at the shipping costs though.... Small things won't be too bad, i can send them as a gift so you shouldnt incur any port taxes. :D |
Cool now we have an inside guy!
|
HI,
I spoke to Amy in the shop, and she apologises, but that is the only photo she has of the lights. They're a pukka store though. Darren |
Can someone attach a pic? Egay is blockasaurus at work. Meh..
|
I really like the looks of them too, Darren>>>if you have a chance find out what it would take for shipping to the US....I'm sure some of us would be glad to reimburse you for your efforts especially if the seller won't ship to us here...
thanks, Rod |
Originally Posted by XCELLER8
(Post 224237)
I really like the looks of them too, Darren>>>if you have a chance find out what it would take for shipping to the US....I'm sure some of us would be glad to reimburse you for your efforts especially if the seller won't ship to us here...
thanks, Rod I've just emailed the store for a rough packaged item weight, i should then be able to calculate shipping costs, its usually flat rate across to the US regardless of final destination. These are pretty expensive units though, £200 each..... thats a lot of dollar! |
well people in the states will pay because there simply is very little to no aftermarket upgrade parts here specific for our trucks! I would imagine it would be the same way for Jeep parts for you, you probably have to import most aftermarket jeep parts but we can get hundreds of them here locally!
|
I think the price is fantastic! Way cheaper than 03-04 headlamps and trim
|
Originally Posted by D1scoDaz
(Post 224244)
I've just emailed the store for a rough packaged item weight, i should then be able to calculate shipping costs, its usually flat rate across to the US regardless of final destination.
These are pretty expensive units though, £200 each..... thats a lot of dollar! So $321 to replace $415 in parts isn't that bad of a deal. Especially if we sell our used parts to someone else. |
A question that hasn't been asked(or maybe I missed it) is how much is a replacement light for the kit going to cost? If it costs an arm and a leg, might as well stick with what I have.
|
That Defender-ish headlight conversion IMO is even better than the 03/04 Disco Headlight conversion, much more rare and unique looking. Seems like you almost could do a homemade/poorman's version with some stock headlight assemblies, some paint, and some creativity.
|
Originally Posted by yloDiscoII
(Post 224273)
That Defender-ish headlight conversion IMO is even better than the 03/04 Disco Headlight conversion, much more rare and unique looking. Seems like you almost could do a homemade/poorman's version with some stock headlight assemblies, some paint, and some creativity.
|
Wow.. I Might just make one!!
|
Originally Posted by Spencerfitch
(Post 224287)
Wow.. I Might just make one!!
|
Originally Posted by yloDiscoII
(Post 224653)
it works perfectly in my head:p:D
See? This post sounded funny in my head... On a serious note - depending on the tint spray you are using, and how much time you spend masking and taking care while spraying...it certainly seems like it could be fairly effective! |
Originally Posted by Rover Chris
(Post 224275)
I was actually thinking the same thing, more or less just tape off both areas around the lights, then just cover the whole lite set assembly with foil, then just brush on some fiberglass resin. That would give you the solid piece shaped properly for the area, then just make some mounting brackets and dremel it out to fit new lights in!
|
Originally Posted by groundandpound
(Post 224658)
And...just exactly how many other voices are confirming how it works in your head? :D
See? This post sounded funny in my head... On a serious note - depending on the tint spray you are using, and how much time you spend masking and taking care while spraying...it certainly seems like it could be fairly effective! Yeah, my initial idea was just to darken out everything on the assembly but a Defender headlight sized circle, but that would seriously jack up the light output. Then I thought (and I'm not sure how easy it would be) to cut a large hole in the glass, then mount a round light in that, so you wouldn't have to adjust any wiring. http://www.roundeyes.com/53571423.jpg Even something more along the lines of the RRC would look good on a Disco... http://farm3.static.flickr.com/2442/...6150a12502.jpg |
1 Attachment(s)
|
no no no yall are doing it all wrong.
Take a peice of sheet aluminum. Cut to dimension to fit over whole headlight and blinker. Bend to shape and coat with sometjing to stiffen. now add a hole for the light and blinkers. |
Originally Posted by Spencerfitch
(Post 224790)
no no no yall are doing it all wrong.
Take a peice of sheet aluminum. Cut to dimension to fit over whole headlight and blinker. Bend to shape and coat with sometjing to stiffen. now add a hole for the light and blinkers. |
i started too. I cut out the aluminum and stopped there. Not sure what to stiffen it with.. Bed liner?
|
Originally Posted by Spencerfitch
(Post 224797)
i started too. I cut out the aluminum and stopped there. Not sure what to stiffen it with.. Bed liner?
How thick is the alum sheet you are using? Not sure what you could use to stiffen it, bedliner might help a little, but probably not enough to make a big difference. Will it not be stable enough once you screw it down in place? |
Originally Posted by Spencerfitch
(Post 224797)
i started too. I cut out the aluminum and stopped there. Not sure what to stiffen it with.. Bed liner?
|
This thread just kind of died, so maybe I can revive it with a pic to inspire. This is one of my all-time favorite Disco's.
http://northwestoverlandsociety.org/...34249_5464.jpg |
I know right? I've been constantly checking it for edited posts etc haha
|
Well I'm working in Illinois right now 800m from home. Truck made it up just fine. 19mpg with 33.5s but no time or material to do anythig.
|
Originally Posted by yloDiscoII
(Post 227208)
This thread just kind of died, so maybe I can revive it with a pic to inspire. This is one of my all-time favorite Disco's.
http://northwestoverlandsociety.org/...34249_5464.jpg |
How is everybody getting such great gas milage? I have a 95 disco and lucky to get 11..
|
Originally Posted by Chris-bob
(Post 227215)
Nice. Where is that in WA?
|
Originally Posted by yloDiscoII
(Post 227208)
This thread just kind of died, so maybe I can revive it with a pic to inspire. This is one of my all-time favorite Disco's.
http://northwestoverlandsociety.org/...34249_5464.jpg I like the ones in this truck. the others, I'm not too hip on. |
All times are GMT -5. The time now is 04:55 PM. |
© 2024 MH Sub I, LLC dba Internet Brands