Help with codes PLEASE
#1
Help with codes PLEASE
I am not sure where to turn now. I have done so much work to my D2 and I can not get rid of these O2 codes. I have replaced ALL 4, replaced a bad Cat, and intake gasket amoung other non engine things.
0134 - No Activity Bank 1 Sensor 1
0135 - Circut Malfunction Bank 1 Sensor 1
0141 - Circut Malfunction Bank 1 Sensor 2
0154 - No Activity Bank 2 Sensor 1
0155 - Circut Malfunction Bank 2 Sensor 1
0159 - Slow Response Bank 2 Sensor 2
0160 - No Detection Bank 2 Sensor 2
0161 - Heater Malfunction Bank 2 Sensor 2
Is it me, or are some of these codes condridicting suck as 0160 and 0159?
I recently cleard the codes, drove 30 miles and then rechecked them to be sure I was getting fresh codes.
I purchased these sensors off of EBay brand new, direct fit, non universal. Could I have just purchased bad sensors? When I first installed them, the CE light went off for 10 miles, came one, went off again, and then came back on and stayed on.
I'm lost, thoughts? I need to get a sticker as I have been driving with a reject for a year and a half.
0134 - No Activity Bank 1 Sensor 1
0135 - Circut Malfunction Bank 1 Sensor 1
0141 - Circut Malfunction Bank 1 Sensor 2
0154 - No Activity Bank 2 Sensor 1
0155 - Circut Malfunction Bank 2 Sensor 1
0159 - Slow Response Bank 2 Sensor 2
0160 - No Detection Bank 2 Sensor 2
0161 - Heater Malfunction Bank 2 Sensor 2
Is it me, or are some of these codes condridicting suck as 0160 and 0159?
I recently cleard the codes, drove 30 miles and then rechecked them to be sure I was getting fresh codes.
I purchased these sensors off of EBay brand new, direct fit, non universal. Could I have just purchased bad sensors? When I first installed them, the CE light went off for 10 miles, came one, went off again, and then came back on and stayed on.
I'm lost, thoughts? I need to get a sticker as I have been driving with a reject for a year and a half.
#2
#5
It really sounds like you have bad sensors or a problem in the wiring.
What brand are they? Was there any warranty?
I've always bought NTK sensors (the Bosch I got were repackaged NTK) and have had no issues.
It might be time to look at the ETM in RAVE and go at the wiring with a multimeter. Or order new NTK sensors from Amazon. But I'd do some electrical trouble shooting first.
What brand are they? Was there any warranty?
I've always bought NTK sensors (the Bosch I got were repackaged NTK) and have had no issues.
It might be time to look at the ETM in RAVE and go at the wiring with a multimeter. Or order new NTK sensors from Amazon. But I'd do some electrical trouble shooting first.
#6
#7
#8
Yeah, those could be made in China or something awful like that. On an up-note though, sometimes Chinese parts are the same shape!!!
#9