Discovery II Talk about the Land Rover Discovery II within.
Sponsored by:
Sponsored by:

OME springs

Thread Tools
 
Search this Thread
 
  #1  
Old 09-24-2013, 12:32 PM
drowssap's Avatar
Baja
Thread Starter
Join Date: Feb 2011
Location: Boston Strong
Posts: 9,298
Received 317 Likes on 311 Posts
Default OME springs

quick question on Old Man Emmue spring are they know to settle?
The reason I ask is I just installed a set of there light duty springs and it appears to have raised the front even with a terrafirma bumper and SD rack. I now have about 20.5 inches from the center line of the wheel and the arch.
 

Last edited by drowssap; 09-24-2013 at 07:24 PM. Reason: 30.5 to 20.5
  #2  
Old 09-24-2013, 09:46 PM
ArmyRover's Avatar
Super Moderator
Join Date: Jun 2008
Location: Augusta, GA
Posts: 10,030
Received 1,589 Likes on 1,305 Posts
Default

If you were on stock tired springs you'll see a bit of lift just by having fresh springs. They do settle a bit but not to much.
 
  #3  
Old 09-24-2013, 10:02 PM
ZGPhoto's Avatar
Camel Trophy
Join Date: Apr 2012
Location: Burlington, VT
Posts: 4,533
Received 102 Likes on 89 Posts
Default

Every coil spring settles, generally not much as Bill said. Sounds like you gained .8" over stock which really isn't much.
 
  #4  
Old 09-25-2013, 07:44 AM
drowssap's Avatar
Baja
Thread Starter
Join Date: Feb 2011
Location: Boston Strong
Posts: 9,298
Received 317 Likes on 311 Posts
Default

I guess I'll have to lengthen the wife's legs by .8 inches then
 
  #5  
Old 09-25-2013, 10:06 AM
Disco Mike's Avatar
Administrator
Join Date: Apr 2006
Location: Denver, Colorado
Posts: 25,707
Likes: 0
Received 103 Likes on 85 Posts
Default

No mater whos coils you use, light duty coils will drop.
I believe as much as I like the OME's, the light duty may drop even more then you may want, especially with the bumper and rack.
I run 751 fronts and 762 rears and I have only lost around 3/8 ths of an inch, but they are H.D.
Be curious to see how they look in 6 months or so, let us know.
 
  #6  
Old 09-25-2013, 10:44 AM
drowssap's Avatar
Baja
Thread Starter
Join Date: Feb 2011
Location: Boston Strong
Posts: 9,298
Received 317 Likes on 311 Posts
Default

I didn't want to go HD I was looking for something to replace my stock springs. The stock spring were junk and sat at about 18 inches. Surprisingly the SD rack doesn't weight a lot the bumper that a different story, but its still hundred of pound less than an ARB.
time will tell I guess.
 
  #7  
Old 09-25-2013, 12:20 PM
FlyingZebra34's Avatar
Recovery Vehicle
Join Date: Feb 2012
Location: Aberdeen, Washington
Posts: 1,039
Received 42 Likes on 34 Posts
Default

OME HD +2" springs are the way to go
 
  #8  
Old 09-26-2013, 07:20 AM
drowssap's Avatar
Baja
Thread Starter
Join Date: Feb 2011
Location: Boston Strong
Posts: 9,298
Received 317 Likes on 311 Posts
Default

thanks but I'm looking to keep the stock ride, which is why I went with the light duty. if I want to bounce around I have other vehicles.
 
  #9  
Old 09-26-2013, 08:22 AM
Disco Mike's Avatar
Administrator
Join Date: Apr 2006
Location: Denver, Colorado
Posts: 25,707
Likes: 0
Received 103 Likes on 85 Posts
Default

Originally Posted by FlyingZebra34
OME HD +2" springs are the way to go
There is no such thing as a HD plus 2" OME lift, there are though 4 different spring set ups based on weight ratings only.
 
  #10  
Old 09-26-2013, 02:01 PM
nychaze's Avatar
Rock Crawling
Join Date: Aug 2011
Location: Denver, CO
Posts: 295
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by FlyingZebra34
OME HD +2" springs are the way to go
If you are loading it with any sort of weight....empty on HD = like riding in a F350, board on wheels. Still better than worn springs...

Although....it feels like I'm riding on a cloud with the boat in tow.
 


Quick Reply: OME springs



All times are GMT -5. The time now is 04:16 AM.