thanks mike for the files.

so i took the drawing to my fab shop friend and looked at the drawings and they think they can make em easily, but if they order in the bar stock and flat stock there will be enough to make several pairs of sliders.

i also talked to my powder guy and he can powder in any off the shelf color we like. i am gonna have my sliders powdered silver to match the body on my rig and put skateboard tape on the top surface for grip as you step in and out.

i will talk with the shop owner on monday to discuss final prices for a single set to me, or for several sets.

if anyone wants to snag a set PM me and i will get you info early next week.

joe

 

To bad the DII sliders are different than DI slider's.

 

how different are they?

 

Not 100% sure.
But all the after market sites say they are different.

AB has the same part number for the DI and DII BUT the DII part number says...D2.
So maybe?
Land Rover Parts, Accessories and Information

How about this Joe, after you get them made up you send me a pair and I will see if they fit my DI.

 

a good friend has a 97 D1. i can test mine against his and see what would have to be modded to make em fit

 

Well there you go.
I'm sure he would be very helpful with that.

 

actually another friend has a 97' and lives about 5 min from me,,,

but your my friend to phil. dont pout

 

To late.
I have tears in my eyes Joe.

Let us know how they work out and the price.

 

i will get pics up along the way.

try to get the raw materials and while they are on the laser cutter and being welded etc.

then finished and raw metal and final powdered and finished

 

Joe, you might want to send me your number so we can talk. Those drawings show sizes for both the D1 and D2's.