Land Rover Forums - Land Rover Enthusiast Forum
Page 4 of 11
« First
2
3
4
5
6
Last »
Show 40 post(s) from this thread on one page

Land Rover Forums - Land Rover Enthusiast Forum (https://landroverforums.com/forum/)
-   Discovery II (https://landroverforums.com/forum/discovery-ii-18/)
-   -   SRC jeep bumpers on and DII (https://landroverforums.com/forum/discovery-ii-18/src-jeep-bumpers-dii-72186/)

all4mee 02-25-2015 03:21 PM
1 Attachment(s)
Another

all4mee 02-25-2015 03:23 PM
1 Attachment(s)
Side shot

all4mee 02-25-2015 03:27 PM
Originally Posted by mattmo78 (Post 506097)
SUB-SCRIBED!!!!

I want, I want, I want!!! :D

When you get the time, can we get a straight on shot of the front? I'm also curious as to what will need to be done/trimmed when a winch is installed. I really like the way the rear bumper looks too.
I have two Winches I'm waiting on. I haven't cut anything as of yet. I Will post pictures when one comes in.

ArmyRover 02-25-2015 03:28 PM
Is that your finished bumper mount?

swak6287 02-25-2015 03:29 PM
You weld a bracket to the bumper, or it came as is?

all4mee 02-25-2015 03:30 PM
This is still a work in progress after I get the winch I might have to make different brackets. Depending on how the winch sits in. My plan is to have the winch behind the grille as much as possible, with out trimming

all4mee 02-25-2015 03:34 PM
Originally Posted by swak6287 (Post 506125)
You weld a bracket to the bumper, or it came as is?
No the brackets bolt to the frame and to the bumper. So if I take the bumper off right now. It's just the four bolts 2 on each side just like the factory. Then there are four bolts on each side holding the brackets to the bumper

ArmyRover 02-25-2015 03:34 PM
I wouldn't trust your current set up for recovery.

My 2 cents and I could be wrong but I would not attempt to recover you with that set up.

all4mee 02-25-2015 03:37 PM
Originally Posted by ArmyRover (Post 506124)
Is that your finished bumper mount?
For now. Until I get my winch in. It my change. The rusted metal is the brackets, i will have them powder coated when I get it the way I want it.

all4mee 02-25-2015 03:47 PM
Originally Posted by ArmyRover (Post 506128)
I wouldn't trust your current set up for recovery.

My 2 cents and I could be wrong but I would not attempt to recover you with that set up.
What are your thoughts?? I'm open to suggestions. Almost the same mounting as the Tactal Rover bumper that was put on a DII last week. The only difference was there mounts were welded to the bumper.


All times are GMT -5. The time now is 06:47 AM.
Page 4 of 11
« First
2
3
4
5
6
Last »
Show 40 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands