Well.. wtf. So I had to install a new instrument cluster because I determined some lights in the panel had been removed by the old owner to hide the lovely 3 amigos. No problem, I planned on having to shell out a few clams to sync to the BCU, no biggie. But my ACE warning light is glowing amber. Now, the funny thing is, my 2002 Disco doesn't have an ACE system. Only one cap on the power steering fluid and no actuator. Any idea wtf is going on with it?

As a side note, my obdII is showing

P1884 and P1590. Not sure if either those shed any light on the situation. Thanks in advance for all the help guys.

 

The cluster is configured for ace. It can be set back to non-ace. I've done it with my nanocom. I'd offer to help, but I no longer have a D2 to plug it into.

 

Thanks Jafir, I'll run it by the mechanic whenever I take it in to get the cluster synced.