Retired - Private For Sale/Trade Classifieds Sell or Trade your stuff for free! Anything for sale by private owner. NO COMMERCIAL POSTS!

Parting '01 DII SE7

 
Thread Tools
 
Search this Thread
 
  #1  
Old 02-16-2012 | 06:06 PM
Paul Grant's Avatar
Thread Starter
|
TReK
Joined: Sep 2006
Posts: 3,306
Likes: 163
From: CT
Default Parting '01 DII SE7

On it's way in as the P38 heads off to the crusher is an '01 DII SE7 with just under 100K on the odometer. The engine was cooked by an inattentive spouse and hubby said "Basta."

In very good condition overall, let me know what you need and I can provide details, prices and photos.

Don't forget, I've parted out three DI's and three RRC's since the beginning of the year. If there's anything else you need just ask.
 
  #2  
Old 02-20-2012 | 07:59 AM
Paul Grant's Avatar
Thread Starter
|
TReK
Joined: Sep 2006
Posts: 3,306
Likes: 163
From: CT
Default

The truck is finished in Oxford (navy) Blue with Bahama Beige leather. The interior is in very good shape and has the console cup holders and a full set of genuine rubber mats.

98k on the odometer.

The front and rear bumper are in great shape.

Brand new, zero miles, radiator.
 
  #3  
Old 02-20-2012 | 08:04 AM
aschmelzer's Avatar
6th Gear
Joined: Jan 2012
Posts: 6
Likes: 0
Default

How much for the front bumper, if its still available? Where are you located? And could you ship, If so how much to Wausau Wi?
 
  #4  
Old 02-20-2012 | 08:14 AM
Paul Grant's Avatar
Thread Starter
|
TReK
Joined: Sep 2006
Posts: 3,306
Likes: 163
From: CT
Default

I am located in CT as is stated in the profile directly above each my posts.

I would only ship the bumper by Greyhound Bus to a terminal near you. The total cost would be $475. You would get the bumper complete with two fog lights. One of the headlight washers had a crack in the plastic casing.

If you are interested contact me at one of the emails listed below.
Cheers,
Paul
 
  #5  
Old 02-20-2012 | 01:21 PM
DiscoIIBrandon's Avatar
Rock Crawling
Joined: Jul 2010
Posts: 435
Likes: 4
From: Lakeland, FL
Default

Originally Posted by Paul Grant
I am located in CT as is stated in the profile directly above each my posts.

I would only ship the bumper by Greyhound Bus to a terminal near you. The total cost would be $475. You would get the bumper complete with two fog lights. One of the headlight washers had a crack in the plastic casing.

If you are interested contact me at one of the emails listed below.
Cheers,
Paul

I STILL am looking for rubber floor mats Paul! Hit me up!
 
  #6  
Old 02-20-2012 | 01:50 PM
DSCVRY's Avatar
Three Wheeling
Joined: Jan 2012
Posts: 62
Likes: 0
From: Northern NJ
Default

I am interested in the passenger side front pillar trim, driver door lock actuator, one spare tire lug nut, and possibly the tires. Available? Good condition?
 
  #7  
Old 02-20-2012 | 02:43 PM
Paul Grant's Avatar
Thread Starter
|
TReK
Joined: Sep 2006
Posts: 3,306
Likes: 163
From: CT
Default

Originally Posted by DiscoIIBrandon
I STILL am looking for rubber floor mats Paul! Hit me up!
I responded to your email. I also sent quotes on the ignition switch, door handles and assorted other items you were interested in.
Thanks,
Paul
 
  #8  
Old 02-20-2012 | 02:46 PM
Paul Grant's Avatar
Thread Starter
|
TReK
Joined: Sep 2006
Posts: 3,306
Likes: 163
From: CT
Default

Originally Posted by DSCVRY
I am interested in the passenger side front pillar trim, driver door lock actuator, one spare tire lug nut, and possibly the tires. Available? Good condition?

The a pillar is $40, the drivers side lock actuator is $65, a spare tire lug nut would be $5. The tires are Coopers and they don't have a ton of tread left on them.
Cheers,
Paul
 
  #9  
Old 02-21-2012 | 09:40 PM
ozzie's Avatar
4wd Low
Joined: Feb 2012
Posts: 12
Likes: 0
Default

I'm looking for the cargo net that is on the headliner behind the drivers seat, also the light for the clock, the cover that goes over the hole in the passenger arm rest, the switch for the passenger dome light, driver door lock actuator.
Thanks Dave O.
 
  #10  
Old 02-22-2012 | 11:22 AM
Andy2Rover's Avatar
Rock Crawling
Joined: Oct 2011
Posts: 341
Likes: 11
From: Vermont
Default

Paul,

Did you sell the rubber floor mats and cup holders? If not, how much shipped to 19083?

Thanks,
Andy
 


Quick Reply: Parting '01 DII SE7



All times are GMT -5. The time now is 10:23 AM.