Retired - Private For Sale/Trade Classifieds Sell or Trade your stuff for free! Anything for sale by private owner. NO COMMERCIAL POSTS!

Parting out 1996 D1 manual

 
Thread Tools
 
Search this Thread
 
  #1  
Old 06-01-2017, 04:28 PM
Four_Stroke's Avatar
Three Wheeling
Thread Starter
Join Date: Jan 2017
Location: Detroit, MI
Posts: 57
Received 0 Likes on 0 Posts
Default Parting out 1996 D1 manual

I'm parting out my 96 D1 5sp with roughly 190k miles on it. I would prefer to sell the Disco as an entire vehicle. As of right now the TJM bumpers are not included (unless the price is right). Let me know what you are looking for then we can work out a price. I'm going to give this 'parting out' plan a couple of weeks for before I send it to the junk yard.

A little about the Disco. I bought it several months ago with several problems, speedo not working, rough start/idle, had a fuel leak and the death wobble. And the previous owner had it vinyl wrapped then removed it but left the sticky residue on it, kind of makes for a matte finish lol. I fixed the speedo issue, death wobble, fuel leak, replaced the rear shocks along with some other sensors and odds and ends. But now the ECU doesn't always get power so I am thinking the alarm module is going bad and I don't really have the time anymore to mess with it. The Disco is Avalon blue with a tan interior, and the seat switches work. Please post any questions you want to know about it before I send it to the scrap yard, I'm thinking 750ish for the entire Disco minus the bumpers. I might be talked into selling the TJM bumpers if you offer is good. The Disco is located in the Detroit area and a trailer would be recommended due to the ecu/alarm module issue. I can't garantuee it will start all the time.




 
  #2  
Old 06-02-2017, 10:16 PM
Shiftonthefly1's Avatar
Pro Wrench
Join Date: Mar 2012
Location: Las Vegas
Posts: 1,900
Received 142 Likes on 113 Posts
Default

How much would you sell all the 5spd stuff for? Trans, shifter, bellhousibg clutch pedals slave cyl ect
 
  #3  
Old 06-03-2017, 07:48 PM
Best4x4's Avatar
Super Moderator
Join Date: Apr 2015
Location: Beaumont, TX
Posts: 7,715
Received 2,272 Likes on 1,676 Posts
Default

Probably for around $750.00 Shift haha....
 
  #4  
Old 06-04-2017, 07:09 AM
Shiftonthefly1's Avatar
Pro Wrench
Join Date: Mar 2012
Location: Las Vegas
Posts: 1,900
Received 142 Likes on 113 Posts
Default

Originally Posted by Best4x4
Probably for around $750.00 Shift haha....
You are probably correct sir.
 
  #5  
Old 06-04-2017, 01:20 PM
Best4x4's Avatar
Super Moderator
Join Date: Apr 2015
Location: Beaumont, TX
Posts: 7,715
Received 2,272 Likes on 1,676 Posts
Default

Originally Posted by Shiftonthefly1
You are probably correct sir.

LoL
 
  #6  
Old 06-07-2017, 09:39 AM
Four_Stroke's Avatar
Three Wheeling
Thread Starter
Join Date: Jan 2017
Location: Detroit, MI
Posts: 57
Received 0 Likes on 0 Posts
Default

Originally Posted by Shiftonthefly1
You are probably correct sir.


Correction, I'd take 500 for it and you get a lot of 'extra' part!


But in all seriousness, that is more work and time that I do not have to remove those components. So I'd take 500 for the entire Disco sans bumpers.
 
  #7  
Old 06-07-2017, 07:53 PM
Four_Stroke's Avatar
Three Wheeling
Thread Starter
Join Date: Jan 2017
Location: Detroit, MI
Posts: 57
Received 0 Likes on 0 Posts
Default

 
  #8  
Old 07-30-2017, 06:18 AM
Speedsterguy's Avatar
Drifting
Join Date: Apr 2017
Posts: 49
Likes: 0
Received 7 Likes on 6 Posts
Default

do you still have it? Im in Ohio
 
  #9  
Old 08-15-2017, 12:35 PM
Four_Stroke's Avatar
Three Wheeling
Thread Starter
Join Date: Jan 2017
Location: Detroit, MI
Posts: 57
Received 0 Likes on 0 Posts
Default

Sorry Speedsterguy I never got the notification there was a reply in the thread. I have pulled A LOT of parts from it and will be listing them with pics. Let me know if there is anything you need/want.
 
  #10  
Old 08-15-2017, 12:40 PM
Four_Stroke's Avatar
Three Wheeling
Thread Starter
Join Date: Jan 2017
Location: Detroit, MI
Posts: 57
Received 0 Likes on 0 Posts
Default D1 Disco parts removed from 1996 Disco Manual

All parts are from a 96 Disco Manual unless otherwise noted. I will get pics up and some prices up when I edit the list, don't mind the 'Box xx" that is for my reference.


Box #1
Front seatbelt - no hardware
Rear seatbelt - w/hardware
Spark plug wires, new – 8
Vehicle Speed Sensor
Mirror switch w/pigtail
Driver and Passenger mirrors w/pigtails
Driver and Passenger taillights w/pigtails
Driver and Passenger headlights w/pigtails
Headlight/Turn signal stalk
Wiper Stalk
Sunroof ECU w/pigtail
Rear Air Control w/pigtail
Front window switch cluster w/pigtail
Rear Sunroof switch w/pigtail
Front dome w/pigtail
Front and Rear Sunroof regulators w/pigtails
Window Lift ECU w/pigtail AMR-1282
Headlight ECU w/pigtail AMR-1173
Wabco box AMR-5557
Interior Fuse Box


Box #2
Starter – newer
Alternator – for core, lug spins when trying to loosen terminal
Coolant reservoir
EVAP Canister
MAF Sensor with hose/tubing
Air-box w/sensor
Ignition Coils
Hood switch
Multifunction Switch
Underhood fuse box – cover doesn’t stay on well
Cooling Fan top cover


Box #3
Right/Left visors
Window switch
Drink holder – below radio mount
Steering wheel cover
Rubber dashpad – above radio
Driver’s seat switch w/fascia
Passenger’s seat switch w/o fascia
Air Controls
Instrument Cluster w/ 183541.4 miles
Instrument Cluster w/ 153801.1 miles
Passenger door handle
3 switch cluster x2
2 switch cluster
Various switches (volume up and down, rear wiper, rear defrost, nextand select)
Interior door handle covers
ECU Cover
IAC switch/sensor/ Idle Controller x2
Other sensor on intake w/bracket
Coolant temperature sensor x2
Fuel temperature sensor x3
Wiper stalk
Multifunction Relay
6 Relays
Window and Heated switch cluster w/pigtail
E-Brake cable – new
Crank Position Sensor 1 Auto Trans 1 Manual Trans
Vehicle Speed Sensor
Fuel Pump Seal – new
Rover Center Caps – Silver x4
Fuse box cover – underhood
Coolant Reservoir cap
160A fuse
Underhood Fuse Box
Driver Door Latch
Driver and Passenger Door Lock Actuator


Box #4
1998 ECU/Alarm modules x2
Passenger front door int/ext handle, lock actuator, and door latch
Driver front door int/ext handle, lock actuator, and door latch


Box #5
Driver Rear door int/ext handle, lock actuator, and door latch
Passenger Rear door int/ext handle, lock actuator, door latch, andwindow switch
Rear Cargo Door latch, window regulator, lock actuator and grab handle
Alpine CDE-147BT radio deck


Box #6
All 4 brake calipers


Box #7
Plenum and Cover
Driver rear door grab handle and window regulator w/bracket
Passenger rear door grab handle and window regulator w/bracket
Driver front door grab handle and window regulator w/bracket
Passenger door grab handle and window regulator w/bracket
Spare tire cover


Spare tire carrier
Jump Seats with trim panels, seatbelts and hardware
Front and rear brake pads new in box
Front wiper motor w/wiper arms
CDL w/manual trans and Hi/Lo box (currently rebuilding)



 
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rangerdan2.3
Retired - Private For Sale/Trade Classifieds
17
03-20-2011 12:13 AM
jrodnj
Retired - Private For Sale/Trade Classifieds
0
10-28-2008 11:52 AM
Chrisinhouston
Discovery II
5
03-09-2008 07:49 PM
luvs2getmuddy
Retired - Private For Sale/Trade Classifieds
5
05-24-2007 08:26 AM
senorris08
Retired - Private For Sale/Trade Classifieds
1
01-08-2007 02:34 AM



Quick Reply: Parting out 1996 D1 manual



All times are GMT -5. The time now is 07:57 AM.