Camera in the mirror?
#1
Camera in the mirror?
We just purchased a 2010 LR4 and discovered the camera/puddle light is missing.
It is shown in the online parts sites but does not list a part number. Any idea what the number is or if it can be purchased seperately? This is what the part looks like. (This is the left mirror)
It is shown in the online parts sites but does not list a part number. Any idea what the number is or if it can be purchased seperately? This is what the part looks like. (This is the left mirror)
#3
Just what I needed
I had the diagram from the service manual, and one of the online parts sites, but did not list the individual part number.
I have been on the LR3 site for some time and have been helped alot, it is nice to see that the LR4 gurus are just as accomidating.
I do appriciate the information.
Jeff
I have been on the LR3 site for some time and have been helped alot, it is nice to see that the LR4 gurus are just as accomidating.
I do appriciate the information.
Jeff
#4
#8
What I got from his post was that he has the option, but the camera on the drivers mirror was missing and just wanted to replace it.
#9
The quest continues
Yes the car has the option. I ran the codes with my gap tool and got this message:
IPMB-Camera
-B12C1-19 (2F) - General electrical failure- circuit current above threshold
(On 21-07-2010 12:01:37 at 72490 mi)
I then removed the mirror and discovered the empty plug just dangling in the housing, No camera/puddle light installed.
So, before I buy this expensive camera/puddle light, how can I verify that the rest of the circuit will not cause the smoke to escape from the camera when I plug it in?
IPMB-Camera
-B12C1-19 (2F) - General electrical failure- circuit current above threshold
(On 21-07-2010 12:01:37 at 72490 mi)
I then removed the mirror and discovered the empty plug just dangling in the housing, No camera/puddle light installed.
So, before I buy this expensive camera/puddle light, how can I verify that the rest of the circuit will not cause the smoke to escape from the camera when I plug it in?
Last edited by Rufflyer; 01-26-2017 at 05:25 PM. Reason: Added info
#10
Yes the car has the option. I ran the codes with my gap tool and got this message:
IPMB-Camera
-B12C1-19 (2F) - General electrical failure- circuit current above threshold
(On 21-07-2010 12:01:37 at 72490 mi)
I then removed tinstalled.plate and discovered the empty plug just dangling in the housing, No camera/puddle light installed.
So, before I buy this expensive camera/puddle light, how can I verify that the rest of the circuit will not cause the smoke to excape from the camera when I plug it in?
IPMB-Camera
-B12C1-19 (2F) - General electrical failure- circuit current above threshold
(On 21-07-2010 12:01:37 at 72490 mi)
I then removed tinstalled.plate and discovered the empty plug just dangling in the housing, No camera/puddle light installed.
So, before I buy this expensive camera/puddle light, how can I verify that the rest of the circuit will not cause the smoke to excape from the camera when I plug it in?
Do you also have a camera in the the other wing mirror? And are the two forward facing camera present as well.
seems odd someone would just take the camera out for a faulty camera. On the display can you view the other cameras but not the one missing? What is the color/resolution like for the other mirror? There was a TSB for crappie cameras, and LR offers an updated version.