Adding oil pressure and temp guage
#1
#3
If you do a search for oil or temp pressure gauges and Discovery II you will find lots
Here is a good how to on installing an oil pressure gauge :
Oil gauge - LAND ROVER CLUB V.I.
You can also use a pancake adapter above the oil filter
As to gauges I have mostly seen pods on the A pillar
Here is a good how to on installing an oil pressure gauge :
Oil gauge - LAND ROVER CLUB V.I.
You can also use a pancake adapter above the oil filter
As to gauges I have mostly seen pods on the A pillar
#4
I nixed the flimsy cup holders and mounted mine there with a simple 3 gauge bracket. Even put green bulbs in to match the rest of the dash. They're inset pretty far back so you don't hit your knuckles on it when shifting in or out of low range; this means I have to lean back a little to read them, but I'm short so no biggie for me..
#6
I’m a fan of this setup. I found it here on the forum somewhere, but I’m not sure who it is.
Here’s a link to the gauges used in the photo.
Automobile Multimeter for EGT, Boost, Amber [SYL-1813A] - $53.00 : auberins.com, Temperature control solutions for home and industry
I plan to do similar with mine using a sandwich plate. I’m not sure what other gauges I’ll decide to run, if any, as I have an Ultragauge also.
#8