What did you do to your p-38 today
#32
I would love to get my windows to go and down and mirrors to work. Apparently no power to the switches. Also need to see why the blender motor is not working. My daughter steam cleaned the motor and now no heat.
Replacing seatbelts and some trim. She has been sitting for over a year now but she started right up when I put new fuel into her.
Replacing seatbelts and some trim. She has been sitting for over a year now but she started right up when I put new fuel into her.
#33
#35
Fixed the windshield squirters, I installed 2 inline pumps for now, I will order a factory style later, need all 3 eventually
Had to solder a new lead into the pigtail of the market light, original wire was so corroded it wouldn’t take , so I spliced in a new piece. Covered the end in liquid electrical tape.
Had to solder a new lead into the pigtail of the market light, original wire was so corroded it wouldn’t take , so I spliced in a new piece. Covered the end in liquid electrical tape.
#36
#37
#38
#39
#40
The bolts came out! Didn't break or round a single one!! Took about an hour total to get the shaft out... Then another hour trying to use a cheap circlip tool, then the got the U-Joints out using the hammer and socket method. New ones went in pretty easy... Reinstalled the shaft today and more than one noise has disappeared and of course it is much smoother now. Big difference, as a matter of fact I probably caught this right before it would have been a wallet buster... Being my first drive shaft self service this guys videos were helpful
While I was underneath I greased the rear prop shaft U-Joint, only the one on the T-case side was serviceable and took 6 squirts before it was full... the rear one no zerk.
Now (well another day actually) on to the rest of the list... bad wheel sensor front right due to leaking axel seal, funny brake noise front left...
While I was underneath I greased the rear prop shaft U-Joint, only the one on the T-case side was serviceable and took 6 squirts before it was full... the rear one no zerk.
Now (well another day actually) on to the rest of the list... bad wheel sensor front right due to leaking axel seal, funny brake noise front left...
Last edited by Dave03S; 07-11-2018 at 05:19 PM.