Hi All,
I meant to post this during the winter, but was curious if any of you also had this occur: Late January/early February, we had some very cold days in the Northeast part of the U.S. On the coldest of the days, I would say 5 to 7 times while commuting to work, when accelerating to pass another vehicle or while going up an incline, on the left side of my PiviPro screen, I would get a message that said "Optimizing" (with an orange bar graph/meter that would slide up). There was no audible tone--just the message on the PiviPro screen. The "optimizing" message would go away about 3 seconds later (when the orange bar graph climbed to the top) I managed to get a picture of it too (see below). I don't think it was a matter of the engine being cold. I always wait for the car to fully warm up prior to accelerating more aggressively. It was 3 degrees Fahrenheit on the day I snapped that image. I assume "optimizing" is a good thing?

Anyone else get this message? Anyone know what it means?



----------------------------------------------------------
2020 Defender 110 First Edition Indus Silver (Current)
2020 Discovery HSE Luxury Si6 Fuji White (Current)
2015 RRS Autobiography Fuji White (Former)
2011 RRS Supercharged Fuji White (Former)
2008 LR2 Fuji White (Former)

 

I’ve not seen it but it looks like you are using navigation in this picture — maybe just route optimization?

 

I also thought it was route optimization the first couple of times, but then I was able to replicate it with hard acceleration. So then realized it was not in reference to navigation optimization. I probably only got the message 5 to 7 times during a 3 week stretch when we had some really cold weather. Hasn't happened during March/April (as the weather has warmed up).
----------------------------------------------------------
2020 Defender 110 First Edition Indus Silver (Current)
2020 Discovery HSE Luxury Si6 Fuji White (Current)
2015 RRS Autobiography Fuji White (Former)
2011 RRS Supercharged Fuji White (Former)
2008 LR2 Fuji White (Former)