Getting Urban Defender WX-1 22's with 285/45r22's on Saturday
#1
Getting Urban Defender WX-1 22's with 285/45r22's on Saturday
Just got these wheels in from Spain, and have an appointment to install Cooper Discoverer AT3 4S 285/45r22's on Saturday. Wheels are 22x10 WX-1 Sawblades and are staggered (+24 and +35). A little worried about rubbing but will add johnson rods if needed. Does anyone have experience with 285/45r22's on stock height defenders?
The following users liked this post:
Royalist (08-17-2021)
#2
your tire specs are conservative. usually it’s the offset that makes the biggest difference. i have super aggressive offsets at +10 front and back on a 10 width wheel and i had rubbing issues with a 1 inch lift. still rub at access height but no issues in normal mode
just remind myself to raise it when backing out.
just remind myself to raise it when backing out.
Just got these wheels in from Spain, and have an appointment to install Cooper Discoverer AT3 4S 285/45r22's on Saturday. Wheels are 22x10 WX-1 Sawblades and are staggered (+24 and +35). A little worried about rubbing but will add johnson rods if needed. Does anyone have experience with 285/45r22's on stock height defenders?
#7
The following 2 users liked this post by PaulLR:
Defendit.. (08-17-2021),
Tartan (08-18-2021)
#8
#9
#10