I and in Texas USA and have a P400 defender 110 X dynamic SE. I got an ARB CKMA12 single compressor and am trying to put it in the engine bay as shown by lucky 8 (same place). I am trying to make something similar to what lucky 8 has. Does any one have design for this mount if they have done it on their own. This should be a fairly simple work but i dont have much experience. So I am trying to get information before i start working on it. Thanks for any help or suggestion.
In case if some one is interested, here is the link from lucky 8 and the video is at the bottom of the page.
https://lucky8llc.com/collections/de...45486778122453

BR
Prasant

 

So you want the Lucky 8 mount but don't want to buy the Lucky 8 mount? Is that right or am I missing something?

 

LOL
No, I dont want lucky 8 mount. I want to make my own. I have my own measurements but am not sure of my design and have not worked much with metals. My fear is that if my designed bracket fails in moving vehicle, it might damage something else. So I was exploring if some one else has done it in some other way and if he wants to share the design.