Hello - received update on Jan 29th.

2 issues -

Digital Instrment Panel-
When the map view is selected between RPM and speedometer, pressing a XM station, the map flashed a scrambled screen and returned to normal. Tapping another station would flash a scrambled scree again,

CarPlay-
iPhone OS and seems to only affect iPhone 7 Plus (unsure of iOS version - my friends iPhone), I have the 11 Pro Max and I don’t see the issue.
The yellow screen returns to maps and back to yellow screen in a continuous cycle.

 

Try restarting the Pivi. To do so, turn off the car, then turn it on while pressing down on the volume control and keep it depressed until it restarts...around 10-15 seconds I believe.

 

Pivi reset is just hold down the power button, while not moving. (at least under the 2.0.8 firmware) Under my initial load software (version # unknown) i could reset the Pivi while driving (had the audio system freeze). Now you need to be stationary for that to work.

My truck "upgraded" to 2.0.6 p18xx yesterday and I haven't tried restarting the Pivi since then.

 

Service advisor responded to my concerns given the video I’ve posted.

Mid March OTA to be released to address the Apple CP ver 14.4.

 

I have tried about 12 times over the past two days to install the latest software! Has anyone had success in installing?

 

Did you lock the truck and leave it alone for an hour or so? Really nothing you can do to cause a software install other than that.

 

Same. I'm guessing a dozen attempts over last few days. I'm close to the battery disconnect but really do not want to do that. Also curious if anyone has been successful?

 

Yes truck was locked overnight in garage, on driveway several times and no luck. I did talk to my sales guy and he told me some of the Defenders are having install problems. 2 options are (1) take it to dealer to have them plug it in for install or (2) wait for Land Rover to put out another update.