2020 Defender Talk about the new 2020 Land Rover Defender
Sponsored by:
Sponsored by:

Roof Rack!!!!

Thread Tools
 
Search this Thread
 
  #31  
Old 12-22-2021 | 08:29 PM
DPReef's Avatar
Drifting
Joined: Oct 2020
Posts: 33
Likes: 10
Default

Originally Posted by Mcdooogs
Looks like the voyager has gotten a little taller doesn't it? I wonder if that added height means the lucky8 rear ladder could sneak in underneath...
I do like the Proud Rhino / lucky 8 ladder. Anyone know what clearance is required to mount the lucky 8 ladder?
 
  #32  
Old 12-23-2021 | 02:33 PM
GrouseK9's Avatar
Pro Wrench
Joined: Jun 2021
Posts: 1,951
Likes: 1,293
From: Hill Country, Tx
Default

@DPReef - I have the Proud Rhino ladder. It actually mounts under the Expedition (JLR) roof rack not above it. So it doesn't add any incremental height. Also, it extends back (towards the rear) less than the spare so you should be covered within both dimensions.
 
  #33  
Old 12-23-2021 | 02:58 PM
Mcdooogs's Avatar
Mudding
Joined: Jul 2021
Posts: 237
Likes: 148
Default

Originally Posted by GrouseK9
@DPReef - I have the Proud Rhino ladder. It actually mounts under the Expedition (JLR) roof rack not above it. So it doesn't add any incremental height. Also, it extends back (towards the rear) less than the spare so you should be covered within both dimensions.
yep, the question is though is if the voyager is now high enough up to fit the lucky 8 ladder under it, into the rails, like it fits under the oem rack
 
  #34  
Old 12-23-2021 | 05:59 PM
GrouseK9's Avatar
Pro Wrench
Joined: Jun 2021
Posts: 1,951
Likes: 1,293
From: Hill Country, Tx
Default

Originally Posted by Mcdooogs
yep, the question is though is if the voyager is now high enough up to fit the lucky 8 ladder under it, into the rails, like it fits under the oem rack
Oops...Missed that part...Regrets for throwing off the thread! Darn skimming all the threads I missed.
 
  #35  
Old 01-13-2022 | 01:23 AM
Diggler25's Avatar
4wd High
Joined: Dec 2021
Posts: 9
Likes: 0
Default

Originally Posted by speedykjr
I wanted to go with a more traditional set up too for skiing and family trips but was frustrated bc I didn’t find any new Defender options on the Yakima or Thule websites. After reading the article below online, I reached out Thule South Africa about how to configure an after market roof rack since Thule has not released any compatible roof racks in the US for the new Defender. They couldn't have been more helpful and educated me that previously released Thule fit kits are being used for the new Defender in both Europe and South Africa. Below is what you need which I was able to find at online stores or on Ebay. I did mine in all black to match the roof (see pic) and it looks much better (and lower profile) than the OEM dealer option. As important, I am experiencing almost no wind noise. Hope this helps everyone.

Thule 3040 Fit Kit
Thule 753 Rapid System Foot Pack
Thule Wingbar Evo 127 (50 in)

https://www.iol.co.za/motoring/industry-ne...f38b97f284




Looks awesome! How high is this from the roof rails? Thinking of doing the same set up. Thanks!
 
  #36  
Old 01-14-2022 | 12:28 PM
sacharama's Avatar
Rock Crawling
Joined: Dec 2020
Posts: 326
Likes: 235
Default

Originally Posted by Diggler25
Looks awesome! How high is this from the roof rails? Thinking of doing the same set up. Thanks!

​​​​​​I have the exact set up brand new in boxes for sale.

$480 + actual shipping.

Just posted on classified as well
https://landroverforums.com/forum/market/110128
 

Last edited by sacharama; 01-14-2022 at 12:39 PM.
  #37  
Old 01-14-2022 | 01:10 PM
ponder's Avatar
Drifting
Joined: Sep 2021
Posts: 38
Likes: 36
Default


Front runner roof rack with lucky8 ladder setup.


Went with the Full Front Runner rack and Luck8 rear ladder.

I think car is now 6’8”. Regular height.
 
The following users liked this post:
DefenderSISU (08-28-2022)
  #38  
Old 08-16-2022 | 07:09 PM
iansantu's Avatar
New Member
Joined: Aug 2022
Posts: 1
Likes: 2
Default

Originally Posted by ponder

Front runner roof rack with lucky8 ladder setup.


Went with the Full Front Runner rack and Luck8 rear ladder.

I think car is now 6’8”. Regular height.
Do you know what modifications are needed to mount the Lucky8 Ladder with the Front Runner Rack? Seen it done a few times, but not a ton of detail around how.
 
The following 2 users liked this post by iansantu:
2thebrim (08-25-2022), DefenderSISU (08-28-2022)
  #39  
Old 08-24-2022 | 01:55 PM
ponder's Avatar
Drifting
Joined: Sep 2021
Posts: 38
Likes: 36
Default

Originally Posted by iansantu
Do you know what modifications are needed to mount the Lucky8 Ladder with the Front Runner Rack? Seen it done a few times, but not a ton of detail around how.
DM me on Instagram. Can send some more specific images.

show what they cut / welded. As Galpin went to a third part shop to re-coat and adjust the connection.

@CaliforniaPonder
 
The following users liked this post:
2thebrim (08-25-2022)
  #40  
Old 08-28-2022 | 10:04 AM
DefenderSISU's Avatar
Rock Crawling
Joined: Jun 2021
Posts: 257
Likes: 188
From: Miramar, Florida
Default

I should of gotten the front runner roof rack instead of the oem
 


Quick Reply: Roof Rack!!!!



All times are GMT -5. The time now is 08:21 AM.