Why does my auto high beam assist keep turning off?
#5
Try toggling them on today, I bet they will "stick". It's got to be software related - like 99% of the other hiccups we are all experiencing intermittently. 2.0.6 helped a bunch, but I still get occasional issues. 2.0.7 just came out, we'll see. Yesterday (just before the 2.0.7 update) my AHBA was toggled off after being on for a couple of weeks. Big improvement over a month ago before the flurry of recent updates, when I needed to reboot Pivi Pro almost daily, but still not stable enough.
#6
I also have the same issue. You go into settings and turn the feature on, and whilst on that drive it works fine. Once you turn the vehicle off and drive again, the setting does not retain itself. You have to get back into settings and turn the feature back on which is annoying. Why can't this be done by double tapping the high beam stalk like it is done in most cars.
I am also having a bunch of software bugs, like reverse cameras staying on while driving without reverting back to the home screen, and audio going into silence (on any media, radio or XM) after a bluetooth phone call. I have no idea what software version I am on and the system says all software updates are up to date. However, noticing that most members here are on the 2.0 plus version, mine as per the attached photo is not showing that. I have owned the car for little over a month, have about 1200 miles on the odometer, which 500 miles were driven to take the car back to the dealer 3 different times to address the tapping noise from the A pillar (and the noise is still there!) I hope Land Rover is paying attention to these forums.
I am also having a bunch of software bugs, like reverse cameras staying on while driving without reverting back to the home screen, and audio going into silence (on any media, radio or XM) after a bluetooth phone call. I have no idea what software version I am on and the system says all software updates are up to date. However, noticing that most members here are on the 2.0 plus version, mine as per the attached photo is not showing that. I have owned the car for little over a month, have about 1200 miles on the odometer, which 500 miles were driven to take the car back to the dealer 3 different times to address the tapping noise from the A pillar (and the noise is still there!) I hope Land Rover is paying attention to these forums.
#7
I have the exact same issue. Still happens despite the recent software update.
----------------------------------------------------------
2020 Defender 110 First Edition Indus Silver (Current)
2020 Discovery HSE Luxury Si6 Fuji White (Current)
2015 RRS Autobiography Fuji White (Former)
2011 RRS Supercharged Fuji White (Former)
2008 LR2 Fuji White (Former)
----------------------------------------------------------
2020 Defender 110 First Edition Indus Silver (Current)
2020 Discovery HSE Luxury Si6 Fuji White (Current)
2015 RRS Autobiography Fuji White (Former)
2011 RRS Supercharged Fuji White (Former)
2008 LR2 Fuji White (Former)
#8
The following users liked this post:
Tucker Woods (12-25-2020)
#9
Auto High Beam Issue
I have about every quirk on my 2020 Defender 110 everyone has mentioned.
1. A pillar noise - not fixed after 2 attempts. They are simply putting on the felt, not the permanent fix.
2. Stereo that stops working a lot - even with new update, better but still occurs sometimes. Used to happen daily.
3. Poor keyfob range
4. On the auto high beam. Here is what I have noticed and maybe some of you can help me verifty this. It tends to happen when I auto start the vehicle. Especially if I get in the defender and DO NOT press the start button and have to restart the defender. With my defender you can remote start it via the app and get in and go into drive without even pressing the start button - nothing like I have ever seen in a car with push button start - of which I have had many
1. A pillar noise - not fixed after 2 attempts. They are simply putting on the felt, not the permanent fix.
2. Stereo that stops working a lot - even with new update, better but still occurs sometimes. Used to happen daily.
3. Poor keyfob range
4. On the auto high beam. Here is what I have noticed and maybe some of you can help me verifty this. It tends to happen when I auto start the vehicle. Especially if I get in the defender and DO NOT press the start button and have to restart the defender. With my defender you can remote start it via the app and get in and go into drive without even pressing the start button - nothing like I have ever seen in a car with push button start - of which I have had many