Steering wheel controls
#1
#2
Yep, you will use the white wire on your pac unit, and connect it to the grey/red on your rover. I had the Becker traffic pro unit stock in my 03, so my grey red wire was connected to the module just behind the heater control panel, below the actual radio.
Then you will want to connect the grey/black to ground.
Thats what I did with mine and it works perfect!
-Nick
Then you will want to connect the grey/black to ground.
Thats what I did with mine and it works perfect!
-Nick
Thread
Thread Starter
Forum
Replies
Last Post