Camp Trailer with a Roof Top Tent (RTT) build thread
#111
So got back in town and got to work.
Installed 20 corner braces on the framing to be on the safe side. Than got the the sides painted, mounted, trimmed to fit and remounted.
Hopefully tomorrow I will finish the top braces. And the roof.
Progress is being made. Unfortunately spring has arrived in Georgia...
Installed 20 corner braces on the framing to be on the safe side. Than got the the sides painted, mounted, trimmed to fit and remounted.
Hopefully tomorrow I will finish the top braces. And the roof.
Progress is being made. Unfortunately spring has arrived in Georgia...
#112
#113
#114
So it was pouring rain so work outside was a no go tonight so, I spent a bit of time on another project for the trailer tonight.
Started with a Husky 12" waterproof box, volt meter, 12v outlet, twin usb port, and a on off switch.
Drilled a few holes and set the outlets in silicone. Once it sets it will be ready to mount on the outside wall of the trailer so I have power while I'm lounging. The case is big enough to fit a couple phones in side safe and sound while charging to.
I was going to get a small pelican case(pricey) but, found the husky case for $10 figured it was worth a shot
Started with a Husky 12" waterproof box, volt meter, 12v outlet, twin usb port, and a on off switch.
Drilled a few holes and set the outlets in silicone. Once it sets it will be ready to mount on the outside wall of the trailer so I have power while I'm lounging. The case is big enough to fit a couple phones in side safe and sound while charging to.
I was going to get a small pelican case(pricey) but, found the husky case for $10 figured it was worth a shot
Last edited by ArmyRover; 05-15-2018 at 07:57 PM.
#117
#118
#119