72 Defender Grill
#11
It is not really possible to switch to a Series II style dash. The bulkhead on a series II had most of the dash welded into it. The small gauge panel bolted to the upper and lower dash rails that were part of the bulkhead. On a Series III the inside surface of the bulkhead is mostly flat and then the upper and lower dash bolt onto it.
If you really want a Series II interior you have two options.
1. Swap out the bulkhead on your Series III with a Series II bulkhead and dash.
2. Sell the Series III and buy a Series II.
The second option is much easier. I could help you locate a good Series II if you are interested in going that route.
Regards,
Mike
If you really want a Series II interior you have two options.
1. Swap out the bulkhead on your Series III with a Series II bulkhead and dash.
2. Sell the Series III and buy a Series II.
The second option is much easier. I could help you locate a good Series II if you are interested in going that route.
Regards,
Mike
Thread
Thread Starter
Forum
Replies
Last Post
Alex_M
Retired - Private 'Wanted' Classifieds
0
02-11-2015 09:06 AM
Tino
Retired - Private 'Wanted' Classifieds
1
11-24-2013 11:45 AM
Blakesrover
Retired - Private For Sale/Trade Classifieds
0
02-20-2013 10:31 PM