Hi all..
im looking for some brake light help.
when I turn my parkers and or headlights on, the brake lights come on too
they stay on until I turn them off.

also with the lights off, the brake lights work as normal.
any help to start would be brilliant.
thanx Bill.

 

look at the rear tail light assembly, and the wiring for the rear bumper just above the exhaust pipe.

 

if not wiring, do you have the rear tail light fog lights on? That will look like the brake lights on. On the dash near the steering wheel. Just a thought. Rear fog guard lights

 

I wish that was the case.
but it’s all brake lights including the one in the top of the rear door.

 

Start with the tail light assembly. I tarted with the wires and it ended up being the assemblies were melted as the P.O. put in LED thingys that melted the sockets and assemblies. much easier to get to than the wiring.

 

Hi Guys.
I want to thank you for the help but I have found the problem.
It was simply a single filament globe where it should have been a double filament globe.
The wrong globe was fitted and after changing it over all good.

Thanx for the offers of help.

 

and who put that bulb in?

 

I took great pride in handing it to the mechanic who found it out after doing some maintenance and he passed on to the apprentice who still denies putting it in.
I left the mechanic laughing a little bit but felt bad for the apprentice.