Discovery I Talk about the Land Rover Discovery Series I within.

hesitation and twitching under throttle

Thread Tools
 
Search this Thread
 
Old May 13, 2012 | 11:41 AM
  #1  
nelsontod's Avatar
Thread Starter
|
Mudding
Joined: Apr 2012
Posts: 103
Likes: 0
Default hesitation and twitching under throttle

my 98 disco does a sort of twitching as Im driving along the highway and when I step on the gas. Its like it is miss firing or something. I can still drive it long and short distances, but you can definatley feel the twitching on the highway. All the plug wires seem fine.

I was wondering what would be causing this. Could it be a bad catalytic converter? I think I recall the cat causing this on a previous vehicle.

any thoughts?

Thanks
 
Reply
Old May 13, 2012 | 11:53 AM
  #2  
Spike555's Avatar
Team Owner
Joined: Jun 2007
Posts: 26,212
Likes: 98
From: Grand Rapids MI
Default

When was the last time new plugs and wires were installed?
That is the first place to start.
 
Reply
Old May 13, 2012 | 12:25 PM
  #3  
nelsontod's Avatar
Thread Starter
|
Mudding
Joined: Apr 2012
Posts: 103
Likes: 0
Default

I will replace them and report back
 
Reply
Old May 13, 2012 | 12:33 PM
  #4  
Disco Mike's Avatar
Administrator
Joined: Apr 2006
Posts: 25,707
Likes: 107
From: Denver, Colorado
Default

Also replace the fuel filter. What octane gas are you burning, when did you last run a good additive, lie BG 44K thru the tank and an induction cleaning?
 
Reply
Old May 13, 2012 | 12:45 PM
  #5  
nelsontod's Avatar
Thread Starter
|
Mudding
Joined: Apr 2012
Posts: 103
Likes: 0
Default

im burning 92 now. this disco is new to me, so I have not added any additives yet. seafoam?
 
Reply
Old May 14, 2012 | 02:57 PM
  #6  
nelsontod's Avatar
Thread Starter
|
Mudding
Joined: Apr 2012
Posts: 103
Likes: 0
Default

put in new plugs, the previous ones were black. It no longer hesitates or twitches. I have new wires to put in when the engine cools, but I definatley notice a 70 less twitching. by the way, on my 98 disco at 127000 miles the plug wires say "lucus" or what ever, and I am guessing they are original. replacing them should allow me to move on to the next issue.
 
Reply
Old May 14, 2012 | 04:18 PM
  #7  
nelsontod's Avatar
Thread Starter
|
Mudding
Joined: Apr 2012
Posts: 103
Likes: 0
Default

I have one extra plug wire and both ends of it are the same..does anybody know where this one goes? all other 8 are attached and the hesitation and twitching is gone/!
 
Reply
Old May 14, 2012 | 05:42 PM
  #8  
ValveCoverGasket's Avatar
Winching
Joined: Aug 2011
Posts: 600
Likes: 1
From: northwest
Default

maybe the pack you bought came with a coil-distributor wire you didnt need?...
 
Reply
Old May 14, 2012 | 05:54 PM
  #9  
nelsontod's Avatar
Thread Starter
|
Mudding
Joined: Apr 2012
Posts: 103
Likes: 0
Default

i dont think so. its a 98 disco 4.0 do i need it?
 
Reply
Old May 14, 2012 | 08:02 PM
  #10  
Spike555's Avatar
Team Owner
Joined: Jun 2007
Posts: 26,212
Likes: 98
From: Grand Rapids MI
Default

You bought plug wires for the wrong engine.
No big deal, that extra wire is for the coil to the distributor.
What plug wires did you buy?
 
Reply



All times are GMT -5. The time now is 08:43 PM.