ABS Code Reader Port Not Working
Thread Starter
|
Drifting
Joined: Apr 2012
Posts: 46
Likes: 10
ABS Code Reader Port Not Working
I have a 2002 Disco the OBD connector does not work.
I did the following:
Checked all the related fuses (twice)
Checked the Brown Ground Wire running to the connector (not working but installed a new ground with verified continuity)
Checked voltage to Purple Wire on connector reading < 1 volt?
Meticulously cleaned contact points on connector with electric cleaner
After all this I still can't read the codes
Any suggestions would be greatly appreciated.
I did the following:
Checked all the related fuses (twice)
Checked the Brown Ground Wire running to the connector (not working but installed a new ground with verified continuity)
Checked voltage to Purple Wire on connector reading < 1 volt?
Meticulously cleaned contact points on connector with electric cleaner
After all this I still can't read the codes
Any suggestions would be greatly appreciated.
Thread
Thread Starter
Forum
Replies
Last Post
Dean
Retired - Private 'Wanted' Classifieds
0
May 17, 2013 06:12 AM
DiscoBenjamin
Discovery II
3
Oct 14, 2011 05:53 PM
johnkbl
Discovery II
2
Jan 13, 2009 08:54 PM
