So I replaced the last O2 sensor today on my '02 Disco II. This is the front drivers side one that is a real bear to get to with any tool. Any how I ran the car in park for a few minutes and it was fine no warning lights. Then my wife takes it out to the store and the service engine soon light comes on. I know I need to get the code read but is this something that happens? The engine is actually running a lot better but who knows.

I hear one of the auto stores will read your codes for free, anyone know which one that is?

 

So get a fault code 4 digit number and get back to us.

 

Any idea which chain store will read the codes? Not many small import shops around here have a Landrover code reader.

 

autozone,vip, advanced auto...all the major chain stores will read them for you

 

great thanks, this should be fun as I have the 3 amigos too

 

Dealer or Rover shop for the 3 amigo's. Any parts house should check or rent you an OBD2 scanner for your check engine light.

 

I just put some black electrical tape over the 3 lights. Actually I have a sneaking suspicion my bad hub has something to do with the 3 amigos but investigating them keeps getting pushed to the bottom of my to do list.

 

uh, yeah, that will do it.....

Where are you located? There is a new produst out that a few owners have that runs around $300 that will read and clear your codes. Mike has one, and I am sure a six pack might get you a read.

 

I'm in western NY, when my Disco hit 100,000 miles it started falling apart and unfortunately I'm back in school so $$ is tight. I have a Hub coming now and I'm going to give it the old college try on my own. This O2 sensor is sensor is a pain though I finally got it replaced after figuring out how to contort my tools in the space and then I get a code, just my luck these days.

 

I have heard that the Actron CP9125 PocketScan OBD II Code Reader works on Rovers, and it will clear codes - looks to be about $60- not too certain about the facts, might need some research