My alarm key opens all doors but drivers side, drivers only opens with manually inserting key. With the remote in will lock the passenger doors with one push and the drivers side with a second push. How, do i get it back to normal for one puch for all doors to lock and unlock.

Thank you for any help

 

If it takes two clicks to open the door, your lock actuator is failing. The good news is that once the weather warms up it should work properly again.

 

Its takes 2 clicks to lock , 1st click locks passenger doors, 2nd click locks drivers. Opening is where the problem is, 1st click opens the passenger doors, no response from drivers doors regardless of clicks of the remote. wearther has not been an issue here in california. Regarding actuator, how hard to replace if thats the issue and how much? Any way to test to see if thats it.

Thank you

 

It's not that difficult to change the actuator, I had to replace mine shortly after I purchased my DII. Get a copy of the Rave manual (in DiscoMike's signature line). I paid $75, IIRC< for a used one.