Concerns after engine rebuild
#12
#13
I have not. The oil level hasn’t changed though. I appreciate the back and forth! In a way I had hoped it was in the cylinders as that might also explain the knocking noise.
#15
Will do. Going to get someone to turn it over with the valve covers off just to visual check rocker movement better and make sure I’m getting good oil flow to the top end. I’ll bore scope tonight or tomorrow and drain the oil.
#16
#19
Bore scoped all the cylinders and everything looked good. No signs of steam cleaning no standing water. Was able to get in to look at the cam and don’t see any issues there. I’m not sure how fast the lifters should bleed down but at max travel the lifters seem to bleed down in 30 seconds or so. Guess I’ll slap it back together and run it till something gives.
#20