Cracked Block?
When you figure out the condition of your block, make your decision, but do get it tested. No reason to not to, considering you’re prepared to fix it.
After you know, choose the option that will make you excited to get it back.
I would do new Coilpacks, wires, plugs, and fuel injectors no matter what option tho. Also, an upgraded Cam makes a huge difference.
I did some porting and polishing of my heads, intake and exhaust manifolds. Did it make it run better? I like to think so, but most importantly I feel proud of the build and it makes me smile to open the hood.
If you love the car, do what will put a smile on your face. It’s different for all of us.
After you know, choose the option that will make you excited to get it back.
I would do new Coilpacks, wires, plugs, and fuel injectors no matter what option tho. Also, an upgraded Cam makes a huge difference.
I did some porting and polishing of my heads, intake and exhaust manifolds. Did it make it run better? I like to think so, but most importantly I feel proud of the build and it makes me smile to open the hood.
If you love the car, do what will put a smile on your face. It’s different for all of us.
TReK
Joined: May 2011
Posts: 2,768
Likes: 396
From: kitchener, canada
I love my 03 disco but topics like this has always made me nervous about the engines. I hope I don't ever deal with this as in Canada it would cost a arm and a leg to get a new engine or rebuild one.
I work on my Rover most repairs I do myself but engine work no way
I always think should I sell it now while the going is good ? But I look at it and it's dam sexy and there ain't many around the ones that are around 80 % are not looked after
I work on my Rover most repairs I do myself but engine work no way
I always think should I sell it now while the going is good ? But I look at it and it's dam sexy and there ain't many around the ones that are around 80 % are not looked after
I love my 03 disco but topics like this has always made me nervous about the engines. I hope I don't ever deal with this as in Canada it would cost a arm and a leg to get a new engine or rebuild one.
I work on my Rover most repairs I do myself but engine work no way
I always think should I sell it now while the going is good ? But I look at it and it's dam sexy and there ain't many around the ones that are around 80 % are not looked after
I work on my Rover most repairs I do myself but engine work no way
I always think should I sell it now while the going is good ? But I look at it and it's dam sexy and there ain't many around the ones that are around 80 % are not looked after
Baja
Joined: Aug 2013
Posts: 5,845
Likes: 368
From: Near Bordeaux, France
The D2 temp gauge is often hidden behind the steering wheel when driving.
Camel Trophy
Joined: Sep 2017
Posts: 3,820
Likes: 1,337
From: Mission BC Canada
I love my 03 disco but topics like this has always made me nervous about the engines. I hope I don't ever deal with this as in Canada it would cost a arm and a leg to get a new engine or rebuild one.
I work on my Rover most repairs I do myself but engine work no way
I always think should I sell it now while the going is good ? But I look at it and it's dam sexy and there ain't many around the ones that are around 80 % are not looked after
I work on my Rover most repairs I do myself but engine work no way
I always think should I sell it now while the going is good ? But I look at it and it's dam sexy and there ain't many around the ones that are around 80 % are not looked after
But if you had to do head gaskets replacing the head bolts with studs would make your lifer easier, they are simpler to torque.
TReK
Joined: May 2011
Posts: 2,768
Likes: 396
From: kitchener, canada
Engine work is more time consuming than hard, these trucks are so easy to work on there is a ton of room in the engine compartment. Worse comes to worse you can source a used engine for around 2500 CDN.
But if you had to do head gaskets replacing the head bolts with studs would make your lifer easier, they are simpler to torque.
But if you had to do head gaskets replacing the head bolts with studs would make your lifer easier, they are simpler to torque.
i think if if you had to do anything internal to a engine it's a lot out of my league guaranteed
as for buying used engines they are hard to find and would you trust one ?
You may surprise yourself though. It is really not that difficult.
TReK
Joined: Feb 2009
Posts: 2,186
Likes: 200
From: Linden, NJ
Not sure if this experience will help, I'll just throw it in.
https://landroverforums.com/forum/di...episode-86311/
15K miles since repair and still strong. Just went NJ-Virginia and back and last weekend at
Muddy Chef Challenge in Vermont. I'v been doing a lot of off-roading and camping lately
Cheers
https://landroverforums.com/forum/di...episode-86311/
15K miles since repair and still strong. Just went NJ-Virginia and back and last weekend at
Muddy Chef Challenge in Vermont. I'v been doing a lot of off-roading and camping lately
Cheers
